Schneider-Electric
XUYBLCO966S

range of product: Telemecanique Photoelectric sensors XU

series name: Application

electronic sensor type: Photo-electric sensor

sensor name: XUY

sensor design: Compact

detection system: Polarised reflex

sensing range: > 0.3...1 m

material: Plastic

line of sight type: Lateral

type of output signal: Discrete

supply circuit type: DC

wiring technique: 4-wire

discrete output type: PNP/NPN

discrete output function: 1 NO or 1 NC programmable

electrical connection: 1 male connector M8, 4 pins

product specific application: Position or presence control of parts on conditionning machine; Detection of shiny parts; Through beam on a conveyor

emission: Red LED

[Sn] nominal sensing distance: 0.02…1 m with reflector Ø 46 mm; 0.02…2 m with reflector Ø 84 mm

enclosure material: Polycarbonate strong housing

pulse frequency: 8 kHz

output type: Solid state

[Us] rated supply voltage: 12...24 V DC with reverse polarity protection

supply voltage limits: 10…30 V DC

switching capacity in mA: 100 mA (overload and short-circuit protection)

switching frequency: <= 1 kHz

maximum voltage drop: <2 V at 100 mA (closed state); <1 V at 10 mA (closed state)

current consumption: < 40 mA no-load

maximum delay response: 500 ms

maximum delay recovery: 500 ms

setting-up: Parametering by buttons

depth: 13 mm

length: 78 mm

width: 30 mm

product certifications: CE; cULus

ambient air temperature for operation: 0…60 °C

ambient air temperature for storage: -20…80 °C

immunity to ambient light: 10000 lux incandescent bulb; 20000 lux natural light

IP degree of protection: IP65 conforming to IEC 60529

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes