Schneider-Electric
LTMR08CBD
Tariff code:
This product is discontinued.
Please contact us for possible replacement product options.
Link to the manufacturers site: LTMR08CBD - motor controller LTMR TeSys T - 24 V DC 8 A for CANopen
Main
range: TeSys
product name: TeSys T
device short name: LTMR
product or component type: Motor controller
device application: Equipment monitoring and control
measurement current: 0.4…8 A
[Us] rated supply voltage: 24 V DC
current consumption: 56...127 mA
supply voltage limits: 20.4…26.24 V DC
communication port protocol: CANopen
bus type: CANopen ISO 1198 interface, addressing 1...127, transmission rate 10...1000 kbit/s, SUB-D 9 with 4 twisted shielded pairs cable; CANopen ISO 1198 interface, addressing 1...127, transmission rate 10...1000 kbit/s, terminal block with 4 twisted shielded pairs cable
Complementary
[Ui] rated insulation voltage: 690 V conforming to EN/IEC 60947-1; 690 V conforming to CSA C22.2 No 14; 690 V conforming to UL 508
[Uimp] rated impulse withstand voltage: 6 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-1; 0.8 kV communication circuit conforming to EN/IEC 60947-4-1; 0.8 kV supply, inputs and outputs conforming to EN/IEC 60947-4-1
short-circuit withstand: 100 kA conforming to EN/IEC 60947-4-1
associated fuse rating: 4 A gG for output; 0.5 A gG for control circuit
protection type: Overload (long time); Phase failure; Load fluctuation; Phase imbalance; Reverse polarity protection; Thermal protection; Thermal overload protection; Earth-leakage protection; Power factor variation; Overload; Locked rotor
network and machine diagnosis type: Trip context information; Remaining operating time before overload tripping; Starting current and time; Event recording; Motor control command recording; Running hours counter/operating time; Waiting time after overload tripping; Trip history information; Phase fault and earth fault trip counters; Fault recording
logic input number: 6
input current: 7 mA
current state 0 guaranteed: Logic input: < 5 V and <= 15 mA for 5 ms
current state 1 guaranteed: Logic input: < 15 V and 2...15 mA for 15 ms
maximum operating frequency: 2 Hz
load current: 5 A at 250 V AC for logic output; 5 A at 30 V DC for logic output
permissible power: 480 VA (AC-15), Ie = 2 A, 500000 cycles (output); 30 W (DC-13), Ie = 1.25 A, 500000 cycles (output)
maximum operating rate: 1800 cyc/h
contacts type and composition: 1 NO + 1 NC fault signal; 3 NO
metering type: Average current Iavg; Phase current I1, I2, I3 RMS; Temperature; Earth-fault current; Imbalance current
measurement accuracy: 5...15 % earth fault current internal measurement; 1 % voltage (100...830 V); 3 % power factor; 5 % earth fault current external measurement; +/- 30 min/year internal clock; 0,02 temperature; 1 % current; 5 % active and reactive power
overvoltage category: III
connection pitch: 5.08 mm
connections - terminals: Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible with cable end; Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) flexible without cable end; Control circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible without cable end; Control circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) solid without cable end; Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) flexible with cable end; Control circuit: connector 2 cable(s) 0.2…1.5 mm² (AWG 24...AWG 14) flexible without cable end; Control circuit: connector 2 cable(s) 0.5…1.5 mm² (AWG 24...AWG 14) flexible without cable end; Control circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) solid without cable end
tightening torque: Control circuit: 0.5…0.6 N.m flat screwdriver 3 mm
pollution degree: 3
electromagnetic compatibility: Electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2; Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3; Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4; Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4; Voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11; Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6; Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5; Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5; Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5; Control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5; Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5; Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5; Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5
width: 91 mm
height: 61 mm
depth: 122.5 mm
net weight: 0.53 kg
web services: Web server
compatibility code: LTMR
Environment
standards: EN 60947-4-1; CSA C22.2 No 14; IEC 60947-4-1; UL 508; IACS E10
product certifications: ATEX; C-Tick; EAC; LROS (Lloyds register of shipping); NOM; BV; RINA; KERI; ABS; UL; CSA; DNV; RMRoS; GL; CCC
protective treatment: 12 x 24 hour cycles conforming to EN/IEC 60068-2-30; 48 h conforming to EN/IEC 60070-2-11; TH conforming to EN/IEC 60068
fire resistance: 650 °C conforming to EN/IEC 60695-2-12; 960 °C conforming to UL 94
ambient air temperature for operation: -20…60 °C
ambient air temperature for storage: -40…80 °C
operating altitude: <= 2000 m without derating
mechanical robustness: Vibrations mounted on symmetrical rail: 1 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6; Vibrations plate mounted: 4 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6; Shocks half sine wave acceleration: 15 Gn for 11 ms conforming to EN/IEC 60068-2-27
IP degree of protection: IP20
Offer Sustainability
Sustainable offer status: Green Premium product
REACh Regulation: Free of Substances of Very High Concern above the threshold
EU RoHS Directive: Compliant
Mercury free: Yes
RoHS exemption information: Yes
China RoHS Regulation: Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure: ENVPEP060308EN_V2
Circularity Profile: ENVEOLI100411EN_V2
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
PVC free: Yes
Halogen content performance: Halogen free plastic parts product
© 2018 Alplan Kft.