Schneider-Electric
ATV310HU75N4E

Range of produc: Easy Altivar 310

Product or component type: Variable speed drive

Product specific application: Simple machine

Assembly style: With heat sink

Device short name: ATV310

Network number of phases: Three phase

[Us] rated supply voltage: 380...460 V - 15...10 %

Motor power kW: 7.5 kW for heavy duty; 11 kW for normal duty

Motor power hp: 10 hp for heavy duty; 15 hp for normal duty

Noise level: 50 dB

Product destination: Asynchronous motors

Quantity per set: Set of 1

EMC filter: Without EMC filter

Type of cooling: Integrated fan

Supply frequency: 50/60 Hz +/- 5 %

communication port protocol: Modbus

Connector type: RJ45 (on front face) for Modbus

Physical interface: 2-wire RS 485 for Modbus

Transmission frame: RTU for Modbus

Transmission rate: 4800 bit/s; 9600 bit/s; 19200 bit/s; 38400 bit/s

Number of addresses: 1…247 for Modbus

Communication service: Read holding registers (03) 29 words; Write single register (06) 29 words; Write multiple registers (16) 27 words; Read/write multiple registers (23) 4/4 words; Read device identification (43)

Line current: 26.6 A at 380 V (heavy duty); 29.5 A at 380 V (normal duty); 22.4 A at 460 V (heavy duty); 24.8 A at 460 V (normal duty)

Apparent power: 17.8 kVA at 460 V (heavy duty); 19.4 kVA at 460 V (normal duty)

Prospective line Isc: 5 kA

Continuous output current: 17 A heavy duty; 22.8 A normal duty

Maximum transient current: 25.5 A during 60 s (heavy duty); 25.1 A during 60 s (normal duty)

Power dissipation in W: 241.2 W, at In (heavy duty); 317.8 W, at In (normal duty)

Speed drive output frequency: 0.5…400 Hz

Nominal switching frequency: 4 kHz

Switching frequency: 2...12 kHz adjustable

Speed range: 1…20

Transient overtorque: 170…200 % of nominal motor torque depending on drive rating and type of motor

Braking torque: Up to 150 % of nominal motor torque with braking resistor at high inertia; Up to 70 % of nominal motor torque without braking resistor

Asynchronous motor control profile: Energy saving ratio; Energy saving ratio; Quadratic voltage/frequency ratio

Motor slip compensation: Adjustable; Adjustable

Output voltage: 380...460 V three phase

Electrical connection: Terminal, clamping capacity: 6...10 mm² (L1, L2, L3, PA/+, PB, U, V, W)

Tightening torque: 2.2…2.4 N.m

insulation: Electrical between power and control

Supply: Internal supply for reference potentiometer: 5 V (4.75…5.25 V)DC, <10 mA with overload and short-circuit protection; Internal supply for logic inputs: 24 V (20.4…28.8 V)DC, <100 mA with overload and short-circuit protection

analogue input number: 1

Analogue input type: Configurable current AI1 0...20 mA 250 Ohm; Configurable voltage AI1 0...10 V 30 kOhm; Configurable voltage AI1 0...5 V 30 kOhm

Discrete input number: 4

Discrete input type: Programmable LI1...LI4 24 V 18...30 V

Discrete input logic: Negative logic (sink), > 16 V (state 0), < 10 V (state 1), input impedance 3.5 kOhm; Positive logic (source), 0...< 5 V (state 0), > 11 V (state 1)

Sampling duration: 10 ms for analogue input; 20 ms, tolerance +/- 1 ms for logic input

Linearity error: +/- 0.3 % of maximum value for analogue input

analogue output number: 1

Analogue output type: AO1 software-configurable voltage: 0...10 V, impedance: 470 Ohm, resolution 8 bits

Discrete output number: 2

Discrete output type: Logic output LO+, LO-; Protected relay output R1A, R1B, R1C 1 C/O

Minimum switching current: 5 mA at 24 V DC for logic relay

Maximum switching current: 2 A at 250 V AC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay; 2 A at 30 V DC on inductive load cos phi = 0.4 L/R = 7 ms for logic relay; 3 A at 250 V AC on resistive load cos phi = 1 L/R = 0 ms for logic relay; 4 A at 30 V DC on resistive load cos phi = 1 L/R = 0 ms for logic relay

Acceleration and deceleration ramps: S; S; U

Braking to standstill: By DC injection, <30 s

Protection type: Line supply overvoltage; Line supply undervoltage; Overcurrent between output phases and earth; Overheating protection; Short-circuit between motor phases; Against input phase loss in three-phase; Thermal motor protection via the drive by continuous calculation of I²t

Frequency resolution: Analog input: converter A/D, 10 bits; Display unit: 0.1 Hz

Time constant: 20 ms +/- 1 ms for reference change

Operating position: Vertical +/- 10 degree

height: 232 mm

Width: 150 mm

Depth: 171 mm

Net weight: 3.7 kg

Electromagnetic compatibility: Electrical fast transient/burst immunity test - test level: level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test - test level: level 3 conforming to IEC 61000-4-2; Immunity to conducted disturbances - test level: level 3 conforming to IEC 61000-4-6; Radiated radio-frequency electromagnetic field immunity test - test level: level 3 conforming to IEC 61000-4-3; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11; Surge immunity test - test level: level 3 conforming to IEC 61000-4-5

Standards: IEC 61800-3; IEC 61800-5-1

IP degree of protection: IP20 without blanking plate on upper part; IP40 top

Pollution degree: 2 conforming to IEC 61800-5-1

Environmental characteristic: Dust pollution resistance class 3S2 conforming to IEC 60721-3-3; Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3

Shock resistance: 15 gn conforming to IEC 60068-2-27 for 11 ms

Relative humidity: 5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3

Ambient air temperature for storage: -25…70 °C

Ambient air temperature for operation: -10…55 °C without derating; 55…60 °C protective cover from the top of the drive removed with current derating 2.2 % per °C

Operating altitude: <= 1000 m without derating

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 23.000 cm

Package 1 Width: 20.000 cm

Package 1 Length: 27.000 cm

Package 1 Weight: 2.150 kg

Unit Type of Package 2: S04

Number of Units in Package 2: 2

Package 2 Height: 30.000 cm

Package 2 Width: 40.000 cm

Package 2 Length: 60.000 cm

Package 2 Weight: 8.956 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 8

Package 3 Height: 74.000 cm

Package 3 Width: 60.000 cm

Package 3 Length: 80.000 cm

Package 3 Weight: 18.600 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Compliant with Exemptions

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP2007007EN

Circularity Profile: ENVEOLI2007007EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins