Schneider-Electric
XPSMC32Z

range of product: Preventa Safety automation

product or component type: Configurable safety controller

safety module name: XPSMC

safety use category: Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1; PLE maximum conforming to EN/ISO 13849-1; SIL 3 maximum conforming to IEC 61508

type of start: Configurable

standards: EN 954-1/EN/ISO 13849-1; EN/IEC 61496-1; EN/IEC 60947-5-1; IEC 61508; EN 1760-1/ISO 13856-1; EN 574/ISO 13851; EN/IEC 60204-1

product certifications: CSA; UL; TÜV

[Us] rated supply voltage: 24 V DC - 20...20 %

number of inputs: 32

communication port protocol: Modbus with 1 RJ45 port(s), serial link, transmission rate: 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps

safety level: Can reach PL e/category 4 conforming to EN 954-1/EN/ISO 13849-1; Can reach SIL 3 conforming to IEC 61508

function of module: Dynamic monitoring of hydraulic valves on linear presses; Eccentric press; Emergency stop monitoring, with or without time delay, 1 or 2-channel wiring; Enabling switch monitoring, 2 or 3 contacts; Foot switch monitoring; Guard monitoring for injection presses and blowing machines; Guard monitoring with 1 or 2 limit switches; Hydraulic press; Magnetic switch monitoring; Monitoring safety stop at top dead centre on eccentric press; Muting function of light curtains; Position selector; Safety mat monitoring; Safety time delays; Shaft/chain breaking monitor; Zero speed detection; Light curtain monitoring category 4 conforming to EN/IEC 61496; Two-hand control category 3 conforming to EN 574/ISO 13851

synchronisation time between inputs: Depending on configuration selected

power consumption in W: 12 W

input protection type: External fuse 16 A

[Uc] control circuit voltage: 28.8 V

maximum line resistance: 100 Ohm <2000 m

output type: 2 relays, 2 NO contacts (4 NO total) circuit(s); Solid state, 6 circuit(s), volt-free

breaking capacity: 180 VA holding AC-15 C300 relay output; 1800 VA inrush AC-15 C300 relay output

breaking capacity: 2 A at 24 V for static output circuit; 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

output thermal current: 4 A for both outputs simultaneously; 6 A for 1 output and 2 A for the other for relay output

[Ith] conventional free air thermal current: 16 A for relay output; 6.5 A for static output circuit

associated fuse rating: 16 A gL for power supply; 4 A gL for relay output; 6 A fast blow for relay output

minimum output current: 10 mA for relay output

minimum output voltage: 17 V for relay output

response time: Configurable : 20 ms or 30 ms with software XPSMCWIN

[Ui] rated insulation voltage: 300 V (pollution degree 2) conforming to IEC 60647-5-1, DIN VDE 0110 part 1

[Uimp] rated impulse withstand voltage: 4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1

method of access: Slave

exchange size: 14 words

number of addresses: 1…247 for Modbus

parity: Even for Modbus; No for Modbus; Odd for Modbus

data format: 1 start bit/8 data bits; 1 stop bit even or odd; 2 stop bits without parity; RTU (Remote Terminal Unit) mode

supported modbus function: 01: 8-bit output data/32-bit input data; 02: 32-bit input data/8-bit output data; 03: information and errors

local signalling: 46 LEDs

mounting support: Mounting plate

depth: 153 mm

height: 151.5 mm

width: 74 mm

net weight: 0.84 kg

IP degree of protection: IP20 conforming to EN/IEC 60529

ambient air temperature for operation: -10…55 °C

ambient air temperature for storage: -25…85 °C

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP1406025EN

Circularity Profile: ENVEOLI1406025EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes