Schneider-Electric
STBEPI2145K

Range of produc: Modicon STB distributed I/O solution

Product or component type: Parallel interface kit

Product specific application: TeSys Quickfit; TeSys U

Kit composition: Terminal spring clamp connector; STBXBA3000 base; Terminal screw type connector; STBEPI2145 module

Number of input channels: 12

Input voltage: 24 V

Input voltage type: DC

Input voltage limits: 15...30 V at state 1; -3...5 V at state 0

Current state 0 guaranteed: <= 0.5 mA

current state 1 guaranteed: >= 2 mA

Number of output channels: 8

Output voltage: 24 V

Output voltage type: DC

Protection type: Power protection integrated fuse on PDM time lag 10 A; Overload protection; Short-circuit protection; Input protection resistor-limited

Cold swapping: Yes

Hot swapping fallback: Yes for standard NIMs

Fallback status: State 0 basic NIMs; User configurable standard NIMs

Electrical connection: 4 RJ45 connectors

[Us] rated supply voltage: 24 V DC

supply: Power distribution module

Product compatibility: Power distribution module STBPDT3100/3105; Mounting base STBXBA3000

Current consumption: <= 100 mA at 24 V DC for sensor bus; <= 220 mA at 24 V DC for actuator bus for 150 ms; 100 mA at 5 V DC for logic bus; 50 mA at 24 V DC for actuator bus (with all 8 outputs at state 0); 80 mA at 24 V DC for actuator bus per output at state 1

Marking: CE

Overvoltage category: II

Status LED: 1 LED (green) module status (RDY); 1 LED (red) module error (ERR); 2 LEDs (green) switch position (S1 and S2); 4 LEDs (green) output status

Depth: 170 mm

height: 28.1 mm

Width: 128.3 mm

Net weight: 0.165 kg

product certifications: FM Class 1 Division 2; UL; CSA

Pollution degree: 2 conforming to IEC 60664-1

Operating altitude: <= 2000 m

IP degree of protection: IP20 conforming to IEC 61131-2 class 1

Ambient air temperature for operation: -25…70 °C (without derating)

Ambient air temperature for storage: -40…85 °C

Relative humidity: 95 % at 60 °C without condensation

Vibration resistance: 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm at 10…58 Hz

Shock resistance: 30 gn for 11 ms conforming to IEC 88 reference 2-27

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 3.5 cm

Package 1 Width: 8 cm

Package 1 Length: 13 cm

Package 1 Weight: 161 g

Unit Type of Package 2: S02

Number of Units in Package 2: 20

Package 2 Height: 15 cm

Package 2 Width: 30 cm

Package 2 Length: 40 cm

Package 2 Weight: 3.646 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 320

Package 3 Height: 75.0 cm

Package 3 Width: 60.0 cm

Package 3 Length: 80.0 cm

Package 3 Weight: 69 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins