Skip to main content

Schneider-Electric
METSEEM4235A18

PwrMtr,18Rog,FDS,Mb/BAC,3Ph4W IEC,S4
Barcode: 3606489564735
Tariff code: 9028309000

This product is discontinued.

Please contact us for possible replacement product options.

Link to the manufacturers site: METSEEM4235A18 - PwrMtr,18Rog,FDS,Mb/BAC,3Ph4W IEC,S4

Main

Range: PowerLogic

Product name: PowerLogic EM4200

device short name: Enercept

product or component type: Energy meter

Type of cable: IEC cable

Device application: Power monitoring

Complementary

Metering type: Power factor; Active power P, P1, P2, P3; Voltage U21, U32, U13, V1, V2, V3; Average current Iavg; Active, reactive, apparent energy (signed, four quadrant); Apparent power S, S1, S2, S3; Peak demand power PM, QM, SM; Reactive power Q, Q1, Q2, Q3; Demand power P, Q, S; Frequency

Accuracy class: Class 1 conforming to ANSI C12.1; Class 1S conforming to IEC 62053-22

Measurement accuracy: 1 %

Measurement current: 50…5000 A

Measurement voltage: 90 V AC 45...65 Hz minimum per phase; 480 V AC 45...65 Hz between phases; 300 V AC 45...65 Hz between phase and neutral

Frequency measurement range: 45…65 Hz

Network frequency: 50 Hz; 60 Hz

Display type: Without display

Local signalling: Status: LED (green and red); Line fault: 3 LED (green, orange and red); Dial pointer indication: LED (yellow); RX/TX: 2 LED (green, orange and red)

Analogue input type: Rogowski coil 0.333 V (impedance 33 kOhm); Voltage (impedance 2.5 MOhm)single phase; Voltage (impedance 5 MOhm)phase to phase

Number of inputs: 0

Number of outputs: 0

Communication port protocol: Modbus RTU at 9600 bauds...115200 bauds (automatic detection); BACnet MS/TP at 9600 bauds...115200 bauds (automatic detection)

communication of data: Net energy; Total energy

Function available: Fixed or rolling block

Provided equipment: Bracket for support; Hook; Rogowski coil 3 457.20 mm

Connections - terminals: Input/output: plug-in connector (bottom) 0.2…1.5 mm² cable(s) ; Current transformer: plug-in connector (bottom) 0.2…1.5 mm² cable(s) ; Communication: plug-in connector (bottom) 0.2…1.5 mm² cable(s)

Wire stripping length: 6 mm

Mounting mode: By screws; By hook; Clip-on

Mounting support: Enclosure; DIN rail

Standards: EN 61010-1; UL 61010-1; CAN/CSA C22.2 No. 61010-1-12

Product certifications: CE conforming to EN 61010-1; CULus conforming to UL 61010-1; BTL; ANSI

width: 46.63 mm

Depth: 35.81 mm

height: 152.36 mm

Environment

Measurement category: Category III 277 V; Category III 300 V

Electromagnetic compatibility: Conducted and radiated emissions conforming to FCC part 15 class A; Conducted and radiated emissions conforming to EN 61000-6-4; Conducted and radiated emissions conforming to EN 61326 + A1; Immunity to conducted disturbances conforming to EN 61000-6-2; Immunity to conducted disturbances conforming to EN 61326-1; Immunity to radiated fields conforming to EN 61000-6-2; Immunity to radiated fields conforming to EN 61326-1

IP degree of protection: IP20 conforming to IEC 60529

Relative humidity: 0…95 %

Pollution degree: 2

Ambient air temperature for operation: -15…60 °C

Ambient air temperature for storage: -40…85 °C

Operating altitude: < 3000 m

Packing Units

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 9.7 cm

Package 1 Width: 21.1 cm

Package 1 Length: 24.1 cm

Package 1 Weight: 1 kg

Offer Sustainability

REACh Regulation: Free of Substances of Very High Concern above the threshold

REACh free of SVHC: Yes

EU RoHS Directive: Compliant

Mercury free: Yes

China RoHS Regulation: Product out of China RoHS scope. Substance declaration for your information

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

© 2018 Alplan Kft.