Schneider-Electric
BMXMSP0200

Range of produc: Modicon X80

Product or component type: PTO module

Number of channels: 2

Number of inputs: 4

Discrete input type: Current sink yes origin input conforming to IEC 61131-2 type 3; Current sink yes proximity input and limit switch input conforming to IEC 61131-2 type 3; Current sink or source counter in position input conforming to IEC 61131-2 type 3; Current sink or source drive ready, emergency input conforming to IEC 61131-2 type 3

Input compatibility: 2-wire/3-wire proximity sensor 19.2…30 V conforming to IEC 947-5-2

Output compatibility: Signal converter (USIC); RS422, 7 mA input; Source input, 5 V to 24 V

Output frequency: 200 kHz <0.5 m with USIC and VW3M8210R05; 100 kHz <5 m with the normal source input circuit; 200 kHz <10 m with the RS422 compatible circuits

Operating threshold: > 12 V no error supply voltage; > 8 V error supply voltage

Input voltage: 24 V DC

Input current: 4.3 mA

Voltage state 1 guaranteed: >= 11 V

Current consumption: 35 mA at 24 V DC preactuator; 150 mA at 3.3 V DC typical; 200 mA at 3.3 V DC maximum

current state 1 guaranteed: >= 2 mA

Voltage state 0 guaranteed: 5 V

Current state 0 guaranteed: <= 1.5 mA

Response time: < 200 µs for position completed input and drive ready input; < 60 µs for origin input and proximity input

Number of outputs: 1 pulse output; 2 auxiliary output

Preactuator voltage detection threshold: < 8 V error preactuator voltage auxiliary output; < 8 V no error preactuator voltage auxiliary output; > 14 V error preactuator voltage pulse output; > 14 V no error preactuator voltage pulse output

Output voltage: 24 V DC

Output voltage limits: 19...30 V

discrete output current: 50 mA

Current per channel: 0.4 A

Maximum leakage current: 0.05 mA at state 0

[Ures] residual voltage: 0.15 V at state 1

Response time on output: 1.2...1.5 ms on appearance; 1.2...1.5 ms on disappearance

Load impedance ohmic: 15000 Ohm

Output overload protection: By current limiter and electronic circuit breaker

Output short-circuit protection: By current limiter and electronic circuit breaker

Reverse polarity protection: By reverse mounting diode on output; Integrated on input

Insulation between channels: No insulated

Insul btwn prim and second: 1500 Vrms

Insulation resistance: > 10 MOhm

Local signalling: 1 LED (green) for module operating (RUN); 1 LED (red) for external fault (I/O); 1 LED (red) for internal fault, module failure (ERR); 1 LED (green) for download (DL); 8 LEDs (green) for channel status (CH00); 8 LEDs (green) for channel status (CH01)

Electrical connection: 2 connectors with 28 pins

module format: Standard

Product certifications: CE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22

ambient air temperature for operation: -25…70 °C

Derating factor: Without

Directives: 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive

Standards: EN/IEC 61131-2; EN/IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; EN/IEC 61000-6-5, interface type 1 and type 2; EN/IEC 61850-3, location G; EN/IEC 60079-0

Environmental characteristic: Hazardous location class I division 2

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 5.400 cm

Package 1 Width: 11.500 cm

Package 1 Length: 11.700 cm

Package 1 Weight: 147.000 g

Unit Type of Package 2: S02

Number of Units in Package 2: 15

Package 2 Height: 15.000 cm

Package 2 Width: 30.000 cm

Package 2 Length: 40.000 cm

Package 2 Weight: 2.527 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins