Schneider-Electric
ATV212HU75M3X

device short name: ATV212

product destination: Asynchronous motors

network number of phases: 3 phases

motor power kW: 7.5 kW

motor power hp: 10 hp

supply voltage limits: 170…264 V

supply frequency: 50...60 Hz - 5...5 %

line current: 23.3 A at 240 V; 27.9 A at 200 V

range of product: Altivar 212

product or component type: Variable speed drive

product specific application: Pumps and fans in HVAC

communication port protocol: Modbus; BACnet; LonWorks; METASYS N2; APOGEE FLN

[Us] rated supply voltage: 200...240 V - 15...10 %

EMC filter: Without EMC filter

IP degree of protection: IP21

apparent power: 12.2 kVA at 240 V

continuous output current: 32 A at 230 V

maximum transient current: 35.2 A for 60 s

speed drive output frequency: 0.5…200 Hz

speed range: 1…10

speed accuracy: +/- 10 % of nominal slip 0.2 Tn to Tn

local signalling: 1 LED (red) for DC bus energized

output voltage: <= power supply voltage

isolation: Electrical between power and control

type of cable: Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR; Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC; With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC

electrical connection: VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14; L1/R, L2/S, L3/T: terminal 16 mm² / AWG 6

tightening torque: 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES); 2.5 N.m, 22 lb.in (L1/R, L2/S, L3/T)

supply: Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection; Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection

sampling duration: 2 ms +/- 0.5 ms F discrete; 2 ms +/- 0.5 ms R discrete; 2 ms +/- 0.5 ms RES discrete; 3.5 ms +/- 0.5 ms VIA analog; 22 ms +/- 0.5 ms VIB analog

response time: FM 2 ms, tolerance +/- 0.5 ms for analog output(s); FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s); FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s); RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)

accuracy: +/- 0.6 % (VIA) for a temperature variation 60 °C; +/- 0.6 % (VIB) for a temperature variation 60 °C; +/- 1 % (FM) for a temperature variation 60 °C

linearity error: VIA: +/- 0.15 % of maximum value for input; VIB: +/- 0.15 % of maximum value for input; FM: +/- 0.2 % for output

analogue output type: FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bits; FM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits

discrete output type: Configurable relay logic: (FLA, FLC) NO - 100000 cycles; Configurable relay logic: (FLB, FLC) NC - 100000 cycles; Configurable relay logic: (RY, RC) NO - 100000 cycles

minimum switching current: 3 mA at 24 V DC for configurable relay logic

maximum switching current: 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R); 5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R); 2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R); 2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)

discrete input type: F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm; R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm; RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm

discrete input logic: Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1); Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)

dielectric strength: 2830 V DC between earth and power terminals; 4230 V DC between control and power terminals

insulation resistance: >= 1 mOhm 500 V DC for 1 minute

frequency resolution: Display unit: 0.1 Hz; Analog input: 0.024/50 Hz

communication service: Time out setting from 0.1 to 100 s; Monitoring inhibitable; Read device identification (43); Write multiple registers (16) 2 words maximum; Write single register (06); Read holding registers (03) 2 words maximum

option card: Communication card for LonWorks

power dissipation in W: 346 W

air flow: 118 m3/h

specific application: HVAC

discrete and process manufacturing: Building - HVAC Compressor for scroll; Building - HVAC Fan; Building - HVAC Pump

power range: 7…11 kW at 200…240 V 3 phases

motor starter type: Variable speed drive

discrete output number: 2

analogue input number: 2

analogue input type: VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits; VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits; VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm; VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits

analogue output number: 1

physical interface: 2-wire RS 485

connector type: 1 RJ45; 1 open style

transmission rate: 9600 bps or 19200 bps

transmission frame: RTU

number of addresses: 1…247

data format: 8 bits, 1 stop, odd even or no configurable parity

type of polarization: No impedance

asynchronous motor control profile: Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo); Voltage/frequency ratio, 5 points; Flux vector control without sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Voltage/frequency ratio, 2 points

torque accuracy: +/- 15 %

transient overtorque: 120 % of nominal motor torque +/- 10 % for 60 s

acceleration and deceleration ramps: Automatic based on the load; Linear adjustable separately from 0.01 to 3200 s

motor slip compensation: Adjustable; Not available in voltage/frequency ratio motor control; Automatic whatever the load

switching frequency: 6...16 kHz adjustable; 12...16 kHz with derating factor

nominal switching frequency: 12 kHz

braking to standstill: By DC injection

network frequency: 47.5...63 Hz

prospective line Isc: 22 kA

protection type: Overheating protection: drive; Thermal power stage: drive; Short-circuit between motor phases: drive; Input phase breaks: drive; Overcurrent between output phases and earth: drive; Overvoltages on the DC bus: drive; Break on the control circuit: drive; Against exceeding limit speed: drive; Line supply overvoltage and undervoltage: drive; Line supply undervoltage: drive; Against input phase loss: drive; Thermal protection: motor; Motor phase break: motor; With PTC probes: motor

width: 180 mm

height: 232 mm

depth: 170 mm

net weight: 6.1 kg

pollution degree: 3 conforming to IEC 61800-5-1

IP degree of protection: IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1; IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529; IP21 conforming to EN/IEC 61800-5-1; IP21 conforming to EN/IEC 60529; IP41 on upper part conforming to EN/IEC 61800-5-1; IP41 on upper part conforming to EN/IEC 60529

vibration resistance: 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6; 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8

shock resistance: 15 gn for 11 ms conforming to IEC 60068-2-27

environmental characteristic: Classes 3C1 conforming to IEC 60721-3-3; Classes 3S2 conforming to IEC 60721-3-3

noise level: 51 dB conforming to 86/188/EEC

operating altitude: 1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m; <= 1000 m without derating

relative humidity: 5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3

ambient air temperature for operation: -10…40 °C (without derating); 40…50 °C (with derating factor)

operating position: Vertical +/- 10 degree

product certifications: CSA; C-Tick; NOM 117; UL

marking: CE

standards: EN 61800-3 environments 1 category C3; IEC 61800-3 environments 1 category C2; IEC 61800-3 environments 1 category C3; IEC 61800-3; EN 61800-3 environments 1 category C1; UL Type 1; EN 61800-5-1; IEC 61800-3 environments 1 category C1; IEC 61800-3 environments 2 category C2; IEC 61800-3 environments 2 category C3; IEC 61800-3 environments 2 category C1; EN 61800-3 environments 1 category C2; IEC 61800-5-1; EN 61800-3 environments 2 category C3; EN 61800-3 environments 2 category C2; EN 61800-3 environments 2 category C1; EN 61800-3

assembly style: With heat sink

electromagnetic compatibility: Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11

regulation loop: Adjustable PI regulator

ambient air temperature for storage: -25…70 °C

Number of Units in Package 1: 1

Number of Units in Package 2: 10

Package 1 Height: 27 cm

Package 1 Length: 29.5 cm

Package 1 Weight: 5.746 kg

Package 1 Width: 23.5 cm

Package 2 Height: 75 cm

Package 2 Length: 80 cm

Package 2 Weight: 70.46 kg

Package 2 Width: 60 cm

Unit Type of Package 1: PCE

Unit Type of Package 2: P06

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP110204EN

Circularity Profile: ENVEOLI1102030EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins