Schneider-Electric
ZBRRH

Range of produc: Harmony

Product or component type: Wireless receiver

Device short name: ZBRRH

Product specific application: Interface to Harmony hub

function of module: Bi-stable

Reset time: 2 ms time delay

Transmission frequency: 2405 MHz

Level or class: 5M00G7W

Antenna type: Omnidirectional

Output type: Transistor PNP

Output contacts: 4 PNP

Time delay range: 0.5 s (tolerance: - 15...15 %)

Maximum switching current: 0.2 mA DC

Minimum switching current: 10 mA at 5 V DC

[Us] rated supply voltage: 24 V DC - 15...20 %

Maximum voltage drop: <2 V DC at 2 A

Communication port protocol: Zigbee green power at 2.4 GHz conforming to IEEE 802.15.4

Maximum sensing distance: 100 m in free field; 25 m transmitter in a plastic box type XAL D and receiver in a metal enclosure; 40 m transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna

Response time: < 30 ms after transmitter clicks

Channels utilisation: 1 Harmony Hub per receiver

Utilisation category: DC-13 conforming to EN/IEC 60947-5-1

Maximum power consumption in VA: 20 VA DC

Maximum power consumption in W: 20 W DC

Breaking capacity: 4.8 W (per output)

Short-circuit protection: 0.4 A fuse type fast blow

Operating position: Any position without derating

Electrical connection: 1 conductor cable 0.14…2.5 mm² - AWG 26...AWG 14 - solid - without cable end conforming to IEC 60947-1; 2 conductors cable 0.14…1.5 mm² - AWG 26...AWG 16 - solid - without cable end conforming to IEC 60947-1; 1 conductor cable 0.14…4 mm² - AWG 26...AWG 12 - flexible - with cable end conforming to IEC 60947-1; 2 conductors cable 0.14…1.5 mm² - AWG 26...AWG 16 - flexible - with cable end conforming to IEC 60947-1

Tightening torque: 0.5…1 N.m conforming to EN/IEC 60947-1

Housing material: Self-extinguishing plastic

Status LED: 1 LED green for power ON; 1 LED green and yellow for reception signal; 4 LEDs green for relay ON

Mounting support: 35 mm symmetrical DIN rail conforming to EN/IEC 60715; Mounting plate

Rated short-duration power frequency withstand voltage: 1 kV 50 Hz conforming to EN/IEC 60947-5-1

[Uimp] rated impulse withstand voltage: 0.8 kV

Surge withstand: 0.5 kV differential mode conforming to IEC 61000-4-5; 1 kV common mode conforming to IEC 61000-4-5

Max power consumption in W: 1 mW

Number of channels: 1

modulation technique: O-QPSK

Bandwidth: 5 MHz

Antenna gain: 0 dBi

Width: 36 mm

height: 108 mm

Depth: 75 mm

Net weight: 0.13 kg

Standards: EN/IEC 60947-5-1

Radio agreement: RSS; SRRC; ANATEL; ARIB T66; FCC; ICASA

product certifications: CCC; CSA; GOST; C-Tick; UL

Marking: CE

Ambient air temperature for storage: -40…70 °C

Relative humidity: 90 % at -20…55 °C, without condensation conforming to ETSI EN 300 440-1

Vibration resistance: +/- 7.5 mm (f= 5…14 Hz) conforming to IEC 60068-2-6; 2 gn (f= 8…150 Hz) conforming to IEC 60068-2-6

Shock resistance: 10 gn (duration = 16 ms) for 6000 shocks conforming to IEC 60068-2-27

IP degree of protection: IP20 (casing) conforming to IEC 60529; IP20 (terminals)

Pollution degree: 2 conforming to IEC 60664-1

Overvoltage category: III conforming to IEC 60664-1

Insulation resistance: > 500 MOhm at 500 V DC conforming to NF C 20-030

[Ui] rated insulation voltage: 60 V conforming to IEC 60664-1

Electromagnetic compatibility: Immunity for industrial environments conforming to EN/IEC 61000-6-2; Conducted and radiated emissions class B conforming to CISPR 22; Electrostatic discharge immunity test - test level: 8 kV (in free air (in insulating parts)) conforming to IEC 61000-4-2; Electrostatic discharge immunity test - test level: 6 kV (on contact (on metal parts)) conforming to IEC 61000-4-2; Susceptibility to electromagnetic fields - test level: 10 V/m (80...2000 MHz) conforming to IEC 61000-4-3; Susceptibility to electromagnetic fields - test level: 3 V/m (80...2700 MHz, distance = 20 m) conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test - test level: 2 kV (power supply wires) conforming to IEC 61000-4-4; Conducted RF disturbances - test level: 10 V conforming to IEC 61000-4-6; Radiated emission conforming to ETSI EN 300 440-1; Conducted emission conforming to EN 300-489-1; Conducted emission conforming to ETSI EN 300 489-3; Radiated emission conforming to ETSI EN 300 440-2; Electrical fast transient/burst immunity test - test level: 1 kV (PNP output wires) conforming to IEC 61000-4-4; 1.2/50 µs shock waves immunity test - test level: 0.5 kV (differential mode) conforming to IEC 61000-4-5; 1.2/50 µs shock waves immunity test - test level: 1 kV (common mode) conforming to IEC 61000-4-5; Immunity to microbreaks and voltage drops - test level: 7 ms conforming to IEC 61000-4-11

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 9.200 cm

Package 1 Width: 10.800 cm

Package 1 Length: 10.200 cm

Package 1 Weight: 118.000 g

Unit Type of Package 2: S03

Number of Units in Package 2: 64

Package 2 Height: 30.000 cm

Package 2 Width: 30.000 cm

Package 2 Length: 40.000 cm

Package 2 Weight: 8.400 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP101106EN

Circularity Profile: ENVEOLI1103010EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins