Schneider-Electric
XS8E1A1PBL01M12
Tariff code: 8536501990
This product is discontinued.
Please contact us for possible replacement product options.
Link to the manufacturers site: XS8E1A1PBL01M12 - Induktív érzékelő, hasáb, é.táv.=15mm NC
Main
range of product: Telemecanique Inductive proximity sensors XS
series name: General purpose
sensor type: Inductive proximity sensor
device application: -
sensor name: XS8
sensor design: Flat form 26 x 26 x 13
size: 13 mm
body type: Fixed
detector flush mounting acceptance: Non flush mountable
material: Plastic
enclosure material: PBT
type of output signal: Discrete
wiring technique: 3-wire
[Sn] nominal sensing distance: 10 mm flush mountable; 15 mm non flush mountable
discrete output function: 1 NC
output circuit type: DC
discrete output type: PNP
electrical connection: Remote male connector M12, 4 pins
cable length: 0.15 m
[Us] rated supply voltage: 12...24 V DC with reverse polarity protection
switching capacity in mA: <= 100 mA DC with overload and short-circuit protection
IP degree of protection: IP67 double insulation conforming to IEC 60529
Complementary
detection face: Frontal
front material: PBT
sensing range: > 8...15 mm
fine adjustment zone: 5…10 mm flush mountable; 5…15 mm non flush mountable
differential travel: 1...15% of Sr
wire insulation material: PvR
supply voltage limits: 10…36 V DC
maximum residual current: 1.5 mA open state
switching frequency: <= 2000 Hz
maximum voltage drop: <2 V (closed)
current consumption: <= 10 mA no-load
maximum delay first up: 10 ms
maximum delay response: 0.3 ms
maximum delay recovery: 0.8 ms
marking: CE
depth: 13 mm
height: 26 mm
width: 26 mm
net weight: 0.04 kg
Environment
product certifications: Ecolab; CSA; UL
ambient air temperature for operation: -25…70 °C
ambient air temperature for storage: -40…85 °C
vibration resistance: 25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6
shock resistance: 50 gn for 11 ms conforming to IEC 60068-2-27
Packing Units
Number of Units in Package 1: 1
Number of Units in Package 2: 20
Package 1 Height: 4.2 cm
Package 1 Length: 6.5 cm
Package 1 Weight: 57.0 g
Package 1 Width: 9.6 cm
Package 2 Height: 15.0 cm
Package 2 Length: 40.0 cm
Package 2 Weight: 1.365 kg
Package 2 Width: 15.0 cm
Unit Type of Package 1: PCE
Unit Type of Package 2: S01
Offer Sustainability
Sustainable offer status: Green Premium product
REACh Regulation: Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free: Yes
RoHS exemption information: Yes
Environmental Disclosure: ENVPEP071001EN
© 2018 Alplan Kft.