Schneider-Electric
XS8E1A1MAL5

range of product: Telemecanique Inductive proximity sensors XS

series name: General purpose

sensor type: Inductive proximity sensor

device application: -

sensor name: XS8

sensor design: Flat form 26 x 26 x 13

size: 13 mm

body type: Fixed

detector flush mounting acceptance: Non flush mountable

material: Plastic

enclosure material: PBT

type of output signal: Discrete

wiring technique: 2-wire

[Sn] nominal sensing distance: 10 mm flush mountable; 15 mm non flush mountable

discrete output function: 1 NO

output circuit type: AC/DC

electrical connection: Cable

cable length: 5 m

[Us] rated supply voltage: 24...240 V AC/DC 50/60 Hz

switching capacity in mA: 5...200 mA AC/DC

IP degree of protection: IP68 double insulation conforming to IEC 60529

detection face: Frontal

front material: PBT

sensing range: > 8...15 mm

fine adjustment zone: 5…10 mm flush mountable; 5…15 mm non flush mountable

differential travel: 1...15% of Sr

cable composition: 2 x 0.34 mm²

wire insulation material: PvR

supply voltage limits: 20…264 V AC/DC

maximum residual current: 1.5 mA open state

switching frequency: <= 2000 Hz

maximum voltage drop: <5.5 V (closed)

current consumption: <= 10 mA no-load

maximum delay first up: 10 ms

maximum delay response: 0.3 ms

maximum delay recovery: 0.8 ms

marking: CE

depth: 13 mm

height: 26 mm

width: 26 mm

net weight: 0.19 kg

product certifications: CCC; UL; CSA

ambient air temperature for operation: -25…70 °C

ambient air temperature for storage: -40…85 °C

vibration resistance: 25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6

shock resistance: 50 gn for 11 ms conforming to IEC 60068-2-27

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP071001EN