Schneider-Electric
LXM28EU10M3X
Tariff code: 8537109199
Link to the manufacturers site: LXM28EU10M3X - Lexium 28 szervohajtás, 1000 W, 1/3f, 230 VAC, 1x Modbus, 2x EtherCAT
Main
Range of produc: Lexium 28
Product or component type: Motion servo drive
Device short name: LXM28E
Format of the drive: Compact housing
Line current: 8.5 A 176.3 % at 220 V, single phase; 8.5 A 155.5 % at 220 V, three phase
Complementary
Network number of phases: Single or three phases
[Us] rated supply voltage: 200...240 V (- 10...15 %) for three phase; 200...240 V (- 20...15 %) for single phase
Supply voltage limits: 200…255 V three phase; 170…255 V single phase
Supply frequency: 50/60 Hz - 5...5 %
Network frequency: 47.5...63 Hz
EMC filter: Without EMC filter
Continuous output current: 7 A at 16 kHz
Output current 3s peak: 21 A at 220 V
Continuous power: 1000 W at 220 V
Nominal power: 1 kW at 220 V 16 kHz
switching frequency: 16 kHz
Overvoltage category: III
Maximum leakage current: 4.5 mA
Output voltage: <= power supply voltage
electrical isolation: Between power and control
Type of cable: Shielded motor cable (temperature: 0…55 °C) copper
Electrical connection: Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (L1-L2); Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (R, S, T); Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (U, V, W, PE); Spring terminal, clamping capacity: 1.3...1.5 mm², AWG 16 (PA/+, PBe)
Discrete input number: 8 programmable (CN1); 2 fast capture (CN1); 1 safety function STO (CN9)
Discrete input voltage: 24 V DC for logic
Discrete input logic: Positive or negative (CN1)
Discrete output number: 5 logic output (CN1) at 12...24 V DC; 1 pulse train output (PTO) (CN1)
Discrete output voltage: 12...24 V DC
Discrete output logic: Positive or negative (CN1)
Control signal type: Servo motor encoder feedback CN2
Protection type: Against reverse polarity: inputs signal; Against short-circuits: outputs signal; Overcurrent: motor; Overvoltage: motor; Undervoltage: motor; Overheating: motor; Overload: motor; Overspeed: motor
Safety function: STO (safe torque off), integrated
Safety level: SIL 2 conforming to IEC 61800-5-2: 2007; SIL 2 conforming to IEC 61508-1: 2010; PL d/category 3 conforming to ISO 13849-1: 2008; SIL 2 conforming to ISO 13849-1: 2009/AC; SIL 2 conforming to IEC 60204-1: 2006; SIL 2 conforming to IEC 60204-1: 2009/A1; SIL 2 conforming to IEC 60204-1: 2010/AC; SIL 2 conforming to IEC 62061: 2012
Communication interface: EtherCAT, integrated
Connector type: RJ45 (CN4) for EtherCAT
Method of access: Slave
Transmission rate: 100 Mbit/s for EtherCAT
Physical interface: RS485 for Modbus Serial line slave
Status LED: 1 LED (red) DC bus energized; 1 LED (multi-colour) N.RUN; 1 LED (multi-colour) N.ERR; 2 LEDs (green) Link (Link Status); 2 LEDs (yellow) activity
Signalling function: Servo status and fault codes five 7-segment display units
Marking: CE; CULus
Type of cooling: Fan
Operating position: Vertical
Product compatibility: Servo motor BCH2 (130 mm, 1 motor stacks) at 1000 W; Servo motor (100 mm, 1 motor stacks) at 1000 W; Servo motor (130 mm, 2 motor stacks) at 900 W; Servo motor (130 mm, 4 motor stacks) at 850 W
Width: 55 mm
height: 150 mm
Depth: 170 mm
Net weight: 1.2 kg
Supply voltage description: Single phase 220 V AC 50...60 Hz; Three phase 220 V AC 50...60 Hz
Network number of phases: 3; 1
Drive voltage drop coefficient: 1
Field weakening: False
Continuous output current 2: 7 A
Output current 3s peak 2: 21 A at 220 V
Switching frequency 2: 16 kHz
continuous output current 3: 7 A
Output current 3s peak 3: 21 A at 220 V
Switching frequency 3: 16 kHz
communication iinterface: EtherCAT; Pulse train output
Emc filter compatibility: Type 020; Type 022
Environment
Electromagnetic compatibility: Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Standards: IEC 61800-5-1
product certifications: cULus; CE; CSA
IP degree of protection: IP20
Vibration resistance: 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
Shock resistance: 10 gn, type I conforming to IEC 60721-3-3
Relative humidity: 5…95 % without condensation
ambient air temperature for operation: 0…55 °C
Ambient air temperature for storage: -25…65 °C
Operating altitude: <= 1000 m without derating; > 1000...2000 m 1 % per 100 m
Packing Units
Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 23.0 cm
Package 1 Width: 23.7 cm
Package 1 Length: 7.5 cm
Package 1 Weight: 1.43 kg
Unit Type of Package 2: S03
Number of Units in Package 2: 5
Package 2 Height: 30.0 cm
Package 2 Width: 30.0 cm
Package 2 Length: 40.0 cm
Package 2 Weight: 7.74 kg
Offer Sustainability
Sustainable offer status: Green Premium product
REACh Regulation: Free of Substances of Very High Concern above the threshold
REACh free of SVHC: Yes
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free: Yes
China RoHS Regulation: X
RoHS exemption information: Yes
Environmental Disclosure: ENVPEP1409001EN
Circularity Profile: ENVEOLI1409001EN
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
PVC free: Yes
© 2018 Alplan Kft.