Schneider-Electric
LXM28AU04M3X

Range of produc: Lexium 28

Product or component type: Motion servo drive

Device short name: LXM28A

Format of the drive: Compact housing

Line current: 3.8 A 211.6 % at 220 V, single phase; 3.8 A 183.7 % at 220 V, three phase

Network number of phases: Three phase; Single phase

[Us] rated supply voltage: 200...240 V (- 10...15 %) for three phase; 200...240 V (- 20...15 %) for single phase

Supply voltage limits: 200…255 V three phase; 170…255 V single phase

Supply frequency: 50/60 Hz - 5...5 %

Network frequency: 47.5...63 Hz

EMC filter: Without EMC filter

Continuous output current: 2.6 A at 16 kHz

Output current 3s peak: 7.8 A at 220 V

Continuous power: 400 W at 220 V

Nominal power: 0.4 kW at 220 V 16 kHz

switching frequency: 16 kHz

Overvoltage category: III

Maximum leakage current: 1.3 mA

Output voltage: <= power supply voltage

electrical isolation: Between power and control

Type of cable: Shielded motor cable (temperature: 0…55 °C) copper

Electrical connection: Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2); Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T); Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE); Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)

Discrete input number: 8 programmable (CN1); 1 pulse train input (PTI) (CN1); 2 fast capture (CN1); 1 safety function STO (CN9)

Discrete input voltage: 24 V DC for logic

Discrete input logic: Positive or negative (CN1)

Discrete output number: 5 logic output (CN1) at 12...24 V DC; 1 pulse train output (PTO) (CN1)

Discrete output voltage: 12...24 V DC

Discrete output logic: Positive or negative (CN1)

analogue input number: 2

Absolute accuracy error: 0.1 %

Analogue input type: V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm, resolution: 14 bits; T_REF voltage analog input

Control signal type: Servo motor encoder feedback CN2

Protection type: Against reverse polarity: inputs signal; Against short-circuits: outputs signal; Overcurrent: motor; Overvoltage: motor; Undervoltage: motor; Overheating: motor; Overload: motor; Overspeed: motor

Safety function: STO (safe torque off), integrated

Safety level: SIL 2 conforming to IEC 61800-5-2: 2007; SIL 2 conforming to IEC 61508-1: 2010; PL d/category 3 conforming to ISO 13849-1: 2008; SIL 2 conforming to ISO 13849-1: 2009/AC; SIL 2 conforming to IEC 60204-1: 2006; SIL 2 conforming to IEC 60204-1: 2009/A1; SIL 2 conforming to IEC 60204-1: 2010/AC; SIL 2 conforming to IEC 62061: 2012

Communication interface: CANopen, integrated; CANmotion, integrated

Connector type: RJ45 (CN4) for CANopen, CANmotion

Method of access: Slave

Transmission rate: 250 kbit/s for bus length of 100…250 m for CANopen, CANmotion; 500 kbit/s for bus length of 4…100 m for CANopen, CANmotion; 1 Mbit/s for bus length of 4 m for CANopen, CANmotion

Number of addresses: 1…127 for CANopen, CANmotion

Physical interface: RS485 for Modbus Serial line slave

Status LED: 1 LED (red) charge; 1 LED (green) RUN; 1 LED (red) error

Signalling function: Servo status and fault codes five 7-segment display units

Marking: CSA; CE; CULus

Type of cooling: Natural convection

Operating position: Vertical

Product compatibility: Servo motor BCH2 (60 mm, 2 motor stacks) at 400 W; Servo motor BCH2 (80 mm, 1 motor stacks) at 400 W; Servo motor BCH2 (130 mm, 1 motor stacks) at 300 W

Width: 55 mm

height: 150 mm

Depth: 146 mm

Net weight: 1 kg

Supply voltage description: Three phase 220 V AC 50...60 Hz; Single phase 220 V AC 50...60 Hz

Network number of phases: 1; 3

Drive voltage drop coefficient: 1

Field weakening: False

Continuous output current 2: 2.6 A

Output current 3s peak 2: 7.8 A at 220 V

Switching frequency 2: 16 kHz

continuous output current 3: 2.6 A

Output current 3s peak 3: 7.8 A at 220 V

Switching frequency 3: 16 kHz

communication iinterface: Pulse train input; CANmotion; Pulse train output; CANopen DS402

Emc filter compatibility: Type 022; Type 020

Electromagnetic compatibility: Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3

Standards: IEC 61800-5-1

product certifications: cULus; CSA; CE

IP degree of protection: IP20

Vibration resistance: 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3

Shock resistance: 10 gn, type I conforming to IEC 60721-3-3

Relative humidity: 5…95 % without condensation

ambient air temperature for operation: 0…55 °C

Ambient air temperature for storage: -25…65 °C

Operating altitude: <= 1000 m without derating; > 1000...2000 m 1 % per 100 m

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 7.594 cm

Package 1 Width: 23.001 cm

Package 1 Length: 23.564 cm

Package 1 Weight: 1.31 kg

Unit Type of Package 2: S03

Number of Units in Package 2: 5

Package 2 Height: 30 cm

Package 2 Width: 29.9 cm

Package 2 Length: 39.8 cm

Package 2 Weight: 7.211 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 40

Package 3 Height: 80 cm

Package 3 Width: 80 cm

Package 3 Length: 60 cm

Package 3 Weight: 66.924 kg

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

REACh free of SVHC: Yes

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP1409001EN

Circularity Profile: ENVEOLI1409001EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes