Schneider-Electric
ILE1B661PB1A8
Tariff code: 8501310099
This product is discontinued.
Please contact us for possible replacement product options.
Link to the manufacturers site: ILE1B661PB1A8 - Lexium ILE integrált hajtásos szervomotor, kefe nélküli DC motorral, 66 mm, Profibus DP, 24…36 V
Main
range of product: Lexium integrated drive
product or component type: Motion integrated drive
device short name: ILE
motor type: Brushless DC motor
number of motor poles: 6
network number of phases: Single phase
[Us] rated supply voltage: 36 V; 24 V
network type: DC
communication interface: Profibus DP, integrated
length: 229 mm
winding type: Medium speed of rotation and medium torque
electrical connection: Printed circuit board connector
holding brake: Without
gear box type: Worm gear, 3 stages
reduction ratio: 115:1 (3675:32)
nominal speed: 35 rpm at 24 V; 35 rpm at 36 V
nominal torque: 10.2 N.m at 24 V; 10.6 N.m at 36 V
Complementary
transmission rate: 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000 and 12000 kbauds
mounting support: Flange
motor flange size: 66 mm
number of motor stacks: 1
centring collar diameter: 36 mm
number of mounting holes: 2
mounting holes diameter: 4.4 mm
feedback type: BLDC encoder
shaft end: Hole
second shaft: Without second shaft end
supply voltage limits: 18…40 V
current consumption: 7000 mA peak; 5500 mA maximum continuous
associated fuse rating: 10 A
input/output type: 4 signals (each be used as input or output)
voltage state 0 guaranteed: -3...4.5 V
voltage state 1 guaranteed: 15...30 V
discrete input current: 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface
discrete output voltage: 23...25 V
maximum switching current: 100 mA per output; 200 mA total
protection type: Safe torque off; Overload of output voltage; Short circuit of the output voltage
maximum supply current: 0.1 A (power stage disabled); 6.8 A at 24 V; 3.8 A at 36 V
nominal output power: 37 W at 24 V; 39 W at 36 V
peak stall torque: 14.95 N.m at 24 V; 20.7 N.m at 36 V
continuous stall torque: 14 N.m
detent torque: 16.7 N.m
speed feedback resolution: 12 points/turn motor; 0.26° gearbox output
accuracy error: +/- 1 point
maximum torsional backlash: 1 °
rotor inertia: 1980 kg.cm²
maximum mechanical speed: 44 rpm
maximum radial force Fr: 200 N
maximum axial force Fa: 80 N
service life in hours: 9000 h bearing
marking: CE
type of cooling: Natural convection
net weight: 2.3 kg
sizing reference: ILE1_661_A8
supply voltage description: Single phase 24 V DC; Single phase 36 V DC
network number of phases: 1
coefficient M0: 0.091875 N.m/rpm
coefficient M0 max: 0.091875 N.m/rpm
voltage 1: 24 V
voltage 1 speed 1: 26.122 rpm
voltage 1 speed 1 max: 26.122 rpm
coefficient 1_0: 15.4 N.m
coefficient 1_1: -0.14546875 N.m/rpm
voltage 2: 36 V
voltage 2 speed 2: 26.122 rpm
voltage 2 speed 2 max: 26.122 rpm
coefficient 2_0: 14 N.m
coefficient 2_1: -0.091875 N.m/rpm
curve type: Lin
accuracy error [angular]: 1 °
reduction ratio: 115
compatibility code: ILE
Environment
standards: EN 61800-3:2001, second environment; IEC 61800-3, Ed 2; EN/IEC 61800-3; IEC 60072-1; EN/IEC 50178; EN 61800-3 : 2001-02; EN 50347
product certifications: TÜV; cUL; UL
ambient air temperature for operation: 50…65 °C (with power derating of 2 % per °C); 0…50 °C (without derating)
permissible ambient air temperature around the device: 105 °C power amplifier; 110 °C motor
ambient air temperature for storage: -25…70 °C
operating altitude: <= 1000 m without derating
relative humidity: 15…85 % without condensation
vibration resistance: 20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
shock resistance: 150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
IP degree of protection: IP41 shaft bushing: conforming to EN/IEC 60034-5; IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Offer Sustainability
Sustainable offer status: Green Premium product
REACh Regulation: Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free: Yes
RoHS exemption information: Yes
China RoHS Regulation: X
Environmental Disclosure: ENVPEP1411012EN
Circularity Profile: ENVEOLI1411012EN
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
PVC free: Yes
© 2018 Alplan Kft.