Schneider-Electric
BSH1403T11F2P

Product or component type: Servo motor

Device short name: BSH

Maximum mechanical speed: 4800 rpm

Continuous stall torque: 27.8 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 27.8 N.m for LXM32.D72N4 at 24 A, 480 V, three phase

Peak stall torque: 90.2 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 90.2 N.m for LXM32.D72N4 at 24 A, 480 V, three phase

Nominal output power: 4100 W for LXM32.D72N4 at 24 A, 400 V, three phase; 4100 W for LXM32.D72N4 at 24 A, 480 V, three phase

Nominal torque: 12.9 N.m for LXM32.D72N4 at 24 A, 400 V, three phase; 12.9 N.m for LXM32.D72N4 at 24 A, 480 V, three phase

Nominal speed: 3000 rpm for LXM32.D72N4 at 24 A, 400 V, three phase; 3000 rpm for LXM32.D72N4 at 24 A, 480 V, three phase

Product compatibility: LXM32.D72N4 at 400 V three phase; LXM32.D72N4 at 480 V three phase

Shaft end: Keyed

IP degree of protection: IP50 standard

Speed feedback resolution: 131072 points/turn

Holding brake: With

Mounting support: International standard

Electrical connection: Rotatable right-angled connectors

Range compatibility: Lexium 32

[Us] rated supply voltage: 480 V

Network number of phases: Three phase

Continuous stall current: 22.3 A

Continuous power: 3.3 W

Maximum current Irms: 72 A for LXM32.D72N4

Maximum permanent current: 81.3 A

Switching frequency: 8 kHz

Second shaft: Without second shaft end

Shaft diameter: 24 mm

Shaft length: 50 mm

Key width: 40 mm

Feedback type: Single turn SinCos Hiperface

Holding torque: 36 N.m holding brake

Motor flange size: 140 mm

Number of motor stacks: 3

Torque constant: 1.58 N.m/A at 120 °C

Back emf constant: 105 V/krpm at 120 °C

Number of motor poles: 10

Rotor inertia: 14.48 kg.cm²

Stator resistance: 0.4 Ohm at 20 °C

Stator inductance: 5.1 mH at 20 °C

Stator electrical time constant: 12.75 ms at 20 °C

Maximum radial force Fr: 1780 N at 3000 rpm; 2030 N at 2000 rpm; 2560 N at 1000 rpm

maximum axial force Fa: 0.2 x Fr

Brake pull-in power: 26 W

Type of cooling: Natural convection

Length: 365.5 mm

Centring collar diameter: 130 mm

Centring collar depth: 3.5 mm

Number of mounting holes: 4

Mounting holes diameter: 11 mm

Circle diameter of the mounting holes: 165 mm

Net weight: 23 kg

Sizing reference: BSH1403T

network number of phases: 3

Accuracy error [angular]: 1.4 °

Coefficient 1_1: -0.00496666666668526 N.m/rpm

Coefficient 1_2: 0.000000000000000057467972970911 N.m/rpm²

Coefficient 1_3: -0.000000000000000000063275779791 N.m/rpm3

Coefficient 1_4: 0.000000000000000000000031221968 N.m/rpm4

Coefficient 1_5: -0.000000000000000000000000007068 N.m/rpm5

Coefficient 1_6: 0 N.m/rpm6

saturation coefficient 1: -0.000000000000000014061099690279

saturation coefficient 2: -0.00514459240608749

saturation coefficient 3: 0.000000000000000000733247529861

temperature copper hot: 120 °C

temperature magnet hot: 100 °C

temperature magnet rt: 20 °C

motor voltage drop coefficient: 1

Unit Type of Package 1: Db

Number of Units in Package 1: 1

Package 1 Height: 26.67 cm

Package 1 Width: 21.59 cm

Package 1 Length: 59.69 cm

Package 1 Weight: 25.1 kg

Unit Type of Package 2: CAR

Number of Units in Package 2: 1

Package 2 Height: 27 cm

Package 2 Width: 27 cm

Package 2 Length: 48.2 cm

Package 2 Weight: 23.29 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP111049EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes