Schneider-Electric
BSH0402P36F2A

Product or component type: Servo motor

Device short name: BSH

Maximum mechanical speed: 10000 rpm

Continuous stall torque: 0.38 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.38 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.38 N.m for LXM32.U45M2 at 1.5 A, 230 V, single phase

Peak stall torque: 1.37 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 1.37 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 1.37 N.m for LXM32.U45M2 at 1.5 A, 230 V, single phase

Nominal output power: 275 W for LXM32.U60N4 at 1.5 A, 480 V, three phase; 289 W for LXM32.U60N4 at 1.5 A, 400 V, three phase; 152 W for LXM32.U45M2 at 1.5 A, 230 V, single phase

Nominal torque: 0.292 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.307 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.364 N.m for LXM32.U45M2 at 1.5 A, 230 V, single phase

Nominal speed: 9000 rpm for LXM32.U60N4 at 1.5 A, 480 V, three phase; 9000 rpm for LXM32.U60N4 at 1.5 A, 400 V, three phase; 4000 rpm for LXM32.U45M2 at 1.5 A, 230 V, single phase

Shaft end: Keyed

IP degree of protection: IP65 standard

Speed feedback resolution: 32768 points/turn

Holding brake: With

mounting support: International standard flange

Electrical connection: Rotatable right-angled connectors

Range compatibility: Lexium 32

[Us] rated supply voltage: 400 V

Network number of phases: Three phase

Continuous stall current: 1.5 A

Continuous power: 398 W

Maximum current Irms: 6 A for LXM32.U60N4 at 480 V; 6 A for LXM32.U60N4 at 400 V; 6 A for LXM32.U45M2 at 230 V

Maximum permanent current: 1.5 A

Switching frequency: 8 kHz

Second shaft: Without second shaft end

Shaft diameter: 8 mm

Shaft length: 25 mm

Key width: 12 mm

Feedback type: Single turn SinCos Hiperface

Holding torque: 0.4 N.m holding brake

Motor flange size: 40 mm

Number of motor stacks: 2

Torque constant: 0.253 N.m/A at 120 °C

Back emf constant: 18 V/krpm at 20 °C

Number of motor poles: 10

Rotor inertia: 0.0588 kg.cm²

Stator resistance: 11.6 Ohm at 20 °C

Stator inductance: 12.8 mH at 20 °C

Stator electrical time constant: 1.1 ms at 20 °C

Maximum axial force Fa: 0.2 x Fr

Brake pull-in power: 5.8 W

Type of cooling: Natural convection

Length: 119.4 mm

Centring collar diameter: 30 mm

Centring collar depth: 2.5 mm

Number of mounting holes: 4

Mounting holes diameter: 4.5 mm

Circle diameter of the mounting holes: 46 mm

Net weight: 0.8 kg

Sizing reference: BSH0402P

Network number of phases: 3

Accuracy error [angular]: 0.08 °

Coefficient 1_1: -0.000008085 N.m/rpm

Coefficient 1_2: 0 N.m/rpm²

Coefficient 1_3: 0 N.m/rpm3

Coefficient 1_4: 0 N.m/rpm4

Coefficient 1_5: 0 N.m/rpm5

Coefficient 1_6: 0 N.m/rpm6

Saturation coefficient 1: -0.0070553975786674

Saturation coefficient 2: -0.0138447370049605

Saturation coefficient 3: 0.00146162640340561

Coefficient 2_0: 0.030927813371642 N.m

Coefficient 2_1: 0.00000211111111111111 N.m/rpm

Temperature copper hot: 120 °C

Temperature magnet hot: 100 °C

Temperature magnet rt: 20 °C

Motor voltage drop coefficient: 1

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 11.0 cm

Package 1 Width: 17.0 cm

Package 1 Length: 24.0 cm

Package 1 Weight: 627.0 g

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes