Schneider-Electric
BSH0401P26F2A

product or component type: Servo motor

device short name: BSH

maximum mechanical speed: 10000 rpm

continuous stall torque: 0.21 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.21 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.21 N.m for LXM32.U45M2 at 1.5 A, 230 V, single phase

peak stall torque: 0.8 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.8 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.8 N.m for LXM32.U45M2 at 1.5 A, 230 V, single phase

nominal output power: 166 W for LXM32.U60N4 at 1.5 A, 480 V, three phase; 166 W for LXM32.U60N4 at 1.5 A, 400 V, three phase; 77 W for LXM32.U45M2 at 1.5 A, 230 V, single phase

nominal torque: 0.176 N.m for LXM32.U60N4 at 1.5 A, 480 V, three phase; 0.176 N.m for LXM32.U60N4 at 1.5 A, 400 V, three phase; 0.184 N.m for LXM32.U45M2 at 1.5 A, 230 V, single phase

nominal speed: 9000 rpm for LXM32.U60N4 at 1.5 A, 480 V, three phase; 9000 rpm for LXM32.U60N4 at 1.5 A, 400 V, three phase; 4000 rpm for LXM32.U45M2 at 1.5 A, 230 V, single phase

shaft end: Smooth shaft

IP degree of protection: IP65 standard

speed feedback resolution: 32768 points/turn

holding brake: With

mounting support: International standard flange

electrical connection: Rotatable right-angled connectors

range compatibility: Lexium 32

[Us] rated supply voltage: 400 V

network number of phases: Three phase

continuous stall current: 1.12 A

continuous power: 220 W

maximum current Irms: 4.7 A for LXM32.U60N4 at 480 V; 4.7 A for LXM32.U60N4 at 400 V; 4.7 A for LXM32.U45M2 at 230 V

maximum permanent current: 1.12 A

switching frequency: 8 kHz

second shaft: Without second shaft end

shaft diameter: 8 mm

shaft length: 25 mm

feedback type: Single turn SinCos Hiperface

holding torque: 0.4 N.m holding brake

motor flange size: 40 mm

number of motor stacks: 1

torque constant: 0.19 N.m/A at 120 °C

back emf constant: 13.6 V/krpm at 20 °C

number of motor poles: 10

rotor inertia: 0.04 kg.cm²

stator resistance: 17.2 Ohm at 20 °C

stator inductance: 14.6 mH at 20 °C

stator electrical time constant: 0.85 ms at 20 °C

maximum axial force Fa: 0.2 x Fr

brake pull-in power: 5.8 W

type of cooling: Natural convection

length: 99.4 mm

centring collar diameter: 30 mm

centring collar depth: 2.5 mm

number of mounting holes: 4

mounting holes diameter: 4.5 mm

circle diameter of the mounting holes: 46 mm

net weight: 0.6 kg

sizing reference: BSH0401P

network number of phases: 3

accuracy error [angular]: 0.08 °

coefficient 1_1: -0.0000036667 N.m/rpm

coefficient 1_2: 0 N.m/rpm²

coefficient 1_3: 0 N.m/rpm3

coefficient 1_4: 0 N.m/rpm4

coefficient 1_5: 0 N.m/rpm5

coefficient 1_6: 0 N.m/rpm6

saturation coefficient 1: -0.0175957658702008

saturation coefficient 2: -0.0138235167971008

saturation coefficient 3: 0.00145938612855732

coefficient 2_0: 0.0188241649361797 N.m

coefficient 2_1: 0.00000118333333333333 N.m/rpm

temperature copper hot: 120 °C

temperature magnet hot: 100 °C

temperature magnet rt: 20 °C

motor voltage drop coefficient: 1

Number of Units in Package 1: 1

Package 1 Height: 11.0 cm

Package 1 Length: 24.0 cm

Package 1 Weight: 627.0 g

Package 1 Width: 17.0 cm

Unit Type of Package 1: PCE

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes