Schneider-Electric
BMH0702T07F1A

Product or component type: Servo motor

Device short name: BMH

Maximum mechanical speed: 8000 rpm

Continuous stall torque: 2.5 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 2.5 N.m for LXM32.D18M2 at 6 A, 230 V, single phase

Peak stall torque: 6.4 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 7.4 N.m for LXM32.D18M2 at 6 A, 230 V, single phase

Nominal output power: 600 W for LXM32.D30M2 at 10 A, 115 V, single phase; 900 W for LXM32.D18M2 at 6 A, 230 V, single phase

Nominal torque: 2.3 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 2.1 N.m for LXM32.D18M2 at 6 A, 230 V, single phase

Nominal speed: 2500 rpm for LXM32.D30M2 at 10 A, 115 V, single phase; 4000 rpm for LXM32.D18M2 at 6 A, 230 V, single phase

Product compatibility: LXM32.D30M2 at 115 V single phase; LXM32.D18M2 at 230 V single phase

Shaft end: Smooth shaft

IP degree of protection: IP54 standard

Speed feedback resolution: 32768 points/turn x 4096 turns

Holding brake: With

Mounting support: International standard flange

Electrical connection: Straight connectors

Range compatibility: Lexium 32

[Us] rated supply voltage: 240 V

Network number of phases: Three phase

Continuous stall current: 5.38 A

Continuous power: 1.51 W

Maximum current Irms: 15 A for LXM32.D30M2; 17.5 A for LXM32.D18M2

Maximum permanent current: 17.71 A

Second shaft: Without second shaft end

Shaft diameter: 11 mm

Shaft length: 23 mm

Feedback type: Multiturn SinCos Hiperface

Holding torque: 3 N.m holding brake

Motor flange size: 70 mm

Number of motor stacks: 2

Torque constant: 0.46 N.m/A at 120 °C

Back emf constant: 29.6 V/krpm at 120 °C

Number of motor poles: 10

Rotor inertia: 1.24 kg.cm²

Stator resistance: 1.15 Ohm at 20 °C

Stator inductance: 3.6 mH at 20 °C

Stator electrical time constant: 3.1 ms at 20 °C

Maximum radial force Fr: 710 N at 1000 rpm; 560 N at 2000 rpm; 490 N at 3000 rpm; 450 N at 4000 rpm; 410 N at 5000 rpm; 390 N at 6000 rpm

maximum axial force Fa: 0.2 x Fr

Brake pull-in power: 7 W

Type of cooling: Natural convection

Length: 193 mm

Centring collar diameter: 60 mm

Centring collar depth: 2.5 mm

Number of mounting holes: 4

Mounting holes diameter: 5.5 mm

Circle diameter of the mounting holes: 82 mm

Net weight: 3.3 kg

Sizing reference: BMH0702T

network number of phases: 3

Accuracy error [angular]: 4.8 °

Coefficient 1_1: -0.0000850000000013 N.m/rpm

Coefficient 1_2: 0.0000000000000000019804158049 N.m/rpm²

Coefficient 1_3: -0.0000000000000000000010620928 N.m/rpm3

Coefficient 1_4: 0.0000000000000000000000002579 N.m/rpm4

Coefficient 1_5: -0.0000000000000000000000000000288886 N.m/rpm5

Coefficient 1_6: 0.00000000000000000000000000000000121 N.m/rpm6

saturation coefficient 1: 0.0000000000000000140467222877

saturation coefficient 2: -0.00672880490296221

saturation coefficient 3: -0.0000000000000000006757379196

coefficient 2_1: 0.0000155000000000008 N.m/rpm

temperature copper hot: 135 °C

temperature magnet hot: 100 °C

temperature magnet rt: 20 °C

motor voltage drop coefficient: 1

Unit Type of Package 1: Db

Number of Units in Package 1: 1

Package 1 Height: 11 cm

Package 1 Width: 20 cm

Package 1 Length: 40 cm

Package 1 Weight: 2.8 kg

Unit Type of Package 2: CAR

Number of Units in Package 2: 1

Package 2 Height: 11 cm

Package 2 Width: 20 cm

Package 2 Length: 40 cm

Package 2 Weight: 2.2 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP111002EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes