Skip to main content

Schneider-Electric
XACA4814

pendant control station XAC-A - 4 pushbuttons 1 Emergency stop
Barcode: 3389110835656
Tariff code: 8537109899

This product is discontinued.

Please contact us for possible replacement product options.

Link to the manufacturers site: XACA4814 - pendant control station XAC-A - 4 pushbuttons 1 Emergency stop

Main

range of product: Harmony XAC

product or component type: Pendant control station

device short name: XACA

Complementary

control station type: Double insulated

enclosure material: Polypropylene

electrical circuit type: Control circuit

enclosure type: Complete ready for use

control station application: Control of single speed hoist motor

control station composition: 4 push-buttons + 1 emergency stop

control button type: First push-button 1 NC + 1 NO raise, slow; Second push-button 1 NC + 1 NO lower, slow; Emergency stop push-button Ø 40 mm 1 NC trigger action; Fourth push-button 1 NC + 1 NO left, slow; Third push-button 1 NC + 1 NO right, slow

product compatibility: ZB2BE102 for emergency stop; ZB2BE102 + ZB2BE101 for each direction

mechanical interlocking: With mechanical interlocking between pairs

control station colour: Yellow

connections - terminals: Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end; Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end

standards: EN/IEC 60947-5-5; EN/IEC 60947-5-1; EN/IEC 60204-32; EN/ISO 13850: 2006; UL 508; CSA C22.2 No 14

product certifications: CCC; GOST

protective treatment: TH

ambient air temperature for operation: -25…70 °C

ambient air temperature for storage: -40…70 °C

vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

shock resistance: 100 gn conforming to IEC 60068-2-27

overvoltage category: Class II conforming to IEC 61140

IP degree of protection: IP65 conforming to IEC 60529

IK degree of protection: IK08 conforming to EN 50102

mechanical durability: 1000000 cycles

cable entry: Rubber sleeve with stepped entry 8…26 mm

contact code designation: A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A; A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A; Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A; Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A

[Ithe] conventional enclosed thermal current: 10 A

[Ui] rated insulation voltage: 600 V (pollution degree 3)

[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1

contact operation: Slow-break

maximum resistance across terminals: 25 MOhm

operating force: 13 N push-button; 8 N emergency stop

short-circuit protection: 10 A fuse protection by cartridge fuse type gG

rated operational power in W: 40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C; 48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C; 65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C

terminals description ISO n°1: (11-12)NC; (13-14)NO

terminals description ISO n°2: (11-12)NC

terminal identifier: (11-12)NC; (13-14)NO

net weight: 0.815 kg

Offer Sustainability

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

REACh free of SVHC: Yes

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free: Yes

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP070905EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

© 2018 Alplan Kft.