Schneider-Electric
VW3A3E202

product or component type: Extended I/O card

Range compatibility: Altivar 61 Plus; Altivar 71 Plus

Supply: Internal supply for reference potentiometer, 10.5 V DC (10…11 V) , <0.01 A, impedance: 1…10 kOhm for overload and short-circuit protection; Internal supply, 24 V DC (21…27 V) , <0.2 A for overload and short-circuit protection

Analogue input number: 2

Analogue input type: AI3-/Al3+ differential current programmable: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution: 11 bits + sign; AI4 software-configurable current: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution: 11 bits; AI4 software-configurable voltage: 0...10 V DC, 24 V max, impedance: 30000 Ohm, sampling time: 4…6 ms, resolution: 11 bits

Analogue output number: 2

Analogue output type: AO2 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms, resolution: 10 bits; AO2 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms, resolution: 10 bits; AO3 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms, resolution: 10 bits; AO3 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms, resolution: 10 bits

Discrete output number: 5

Discrete output type: (LO3, LO4) assignable logic, sampling time: 4…6 ms, compatible with level 1 PLC; (R4A, R4B, R4C) configurable relay logic

Discrete output logic: (LO3, LO4) negative; (LO3, LO4) positive

Discrete input number: 6

Discrete input type: (RP) frequency control, sampling time: 4…6 ms; (LI11...LI14) programmable, compatible with level 1 PLC, impedance: 3.5 kOhm, sampling time: 4…6 ms

Discrete input logic: Negative (LI11...LI14), >= 16 V (state 0), <= 10 V (state 1); Positive (LI11...LI14), <= 5 V (state 0), >= 11 V (state 1); Positive (RP), < 1.2 V (state 0), >= 3.5 V (state 1)

Electrical durability: 100000 cycles for configurable relay logic

Discrete output voltage: 24 V DC (voltage limits: <= 30 V) assignable logic

Maximum output current: 0.2 A, assignable logic

Minimum switching current: 3 mA at 24 V DC for configurable relay logic

Maximum switching current: Configurable relay logic 5 A at 250 V AC on resistive load, cos phi = 1; Configurable relay logic 5 A at 30 V DC on resistive load, cos phi = 1; Configurable relay logic 1.5 A at 250 V AC on inductive load, cos phi = 0.4 and L/R = 7 ms; Configurable relay logic 1.5 A at 30 V DC on inductive load, cos phi = 0.4 and L/R = 7 ms

PTC probe input: TH2+, TH2- trip resistance, impedance: 3 kOhm; TH2+, TH2- reset resistance, impedance: 1.8 Ohm; TH2+, TH2- short circuit protection, impedance: < 0.05 Ohm; TH2+, TH2- for 6 PTC probe, impedance: <= 1.5 Ohm

Discrete input voltage: 24 V DC (voltage limits: <= 30 V) for programmable

Discrete input frequency: 0...30 kHz frequency control

Electrical connection: Terminal, 1.5 mm² / AWG 16, 0.25 N.m

Net weight: 0.3 kg

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 7.5 cm

Package 1 Width: 17.0 cm

Package 1 Length: 23.5 cm

Package 1 Weight: 409.0 g