Schneider-Electric
OTB1E0DM9LP

range of product: Modicon OTB

product or component type: I/O distributed module

integrated connection type: Ethernet TCP/IP RJ45, transmission mode: 1 twisted pair at 10/100 Mbit/s, web server transparent ready class A10

discrete input number: 12 conforming to EN/IEC 61131 type 1

discrete input logic: Sink or source

discrete input current: 5 mA for I0...I1; 5 mA for I6...I7; 7 mA for I2...I5; 7 mA for I8...I11

discrete output number: 2 solid state PNP for Q0...Q1 output logic: source; 6 relay for Q2...Q7

discrete output current: 2000 mA for relay; 300 mA for solid state

concept: Transparent Ready

port Ethernet: 10BASE-T/10BASE-TX

bus length: 0…100 m, copper

number of devices per segment: 0…256

communication service: Modbus messaging

web services: No standard Web server

discrete input voltage: 24 V

discrete input voltage type: DC

discrete input type: NPN or PNP

input voltage limits: 20.4...26.4 V

electronic filtering time: 0.035 ms for I0...I1 at state 1; 0.035 ms for I6...I7 at state 1; 0.04 ms for I2...I5 at state 1; 0.04 ms for I8...I11 at state 1; 0.045 ms for I0...I1 at state 0; 0.045 ms for I6...I7 at state 0; 0.15 ms for I2...I5 at state 0; 0.15 ms for I8...I11 at state 0

configurable filtering time: 0 ms; 3 ms; 12 ms

input impedance: 3.4 kOhm for I2...I5; 3.4 kOhm for I8...I11; 5.7 kOhm for I0...I1; 5.7 kOhm for I6...I7

discrete output voltage: 24 V DC solid state output(s); 240 V AC relay output(s); 30 V DC relay output(s)

output voltage limits: 20.4...28.8 V solid state

maximum output current: 360 mA, solid state

maximum current per output common: 8 A relay; 0.72 A solid state

current consumption: 30 mA at 5 V DC (at state 1) relay output; 40 mA at 24 V DC (at state 1) relay output; 5 mA at 5 V DC (at state 0) relay output

output overvoltage protection: 38...40 V

maximum tungsten load: <8 W for solid state

response time: 300 µs at state 0 for relay; 300 µs at state 1 for relay; 5 µs at state 0 for solid state; 5 µs at state 1 for solid state

minimum switchable load: 0.1 mA

contact bounce time: <= 1 ms for relay

maximum leakage current: 0.1 mA at state 0 for solid state

drop-out voltage: 1 V at state 1

insulation between channel and internal logic: 1500 Vrms for 1 minute for relay output; 500 Vrms for 1 minute for input circuit; 500 Vrms for 1 minute for solid state output

insulation between channels: None

contact resistance: 30 mOhm

electrical durability: 500000 cycles AC-1 with 500 VA load for relay output; 500000 cycles AC-14 with 250 VA load for relay output; 500000 cycles AC-15 with 200 VA load for relay output; 500000 cycles DC-1 with 60 W load for relay output; 500000 cycles DC-13 with 30 W load for relay output

supply circuit type: DC

[Us] rated supply voltage: 24 V

supply voltage limits: 20.4…26.2 V

input current: 700 mA at 26.2 V for supply circuit

inrush current: 1 A for solid state output; 50 A for supply circuit

power consumption in W: 19 W

maximum number of I/O expansion module: 7

I/O expansion capacity: 132 with screw terminal discrete I/O module(s); 188 with spring terminal discrete I/O module(s); 244 with HE10 connector discrete I/O module(s); 7 x 8I or 7 x 2I or 7 x (4I/2O) with screw terminal analogue I/O module(s)

insulation resistance: >= 10 MOhm between I/O and earth terminals; >= 10 MOhm between power supply and earth

I/O connection: Removable screw terminal block

number of common point: 1 for relay output (1 NO); 1 for relay output (2 NO); 1 for relay output (3 NO); 1 for input; 1 for solid state output

counting input number: 2

counting capacity: 32 bits

counting frequency: 5000 Hz; 20000 Hz

pulse generator number: 2

pulse generator frequency: 7 kHz

pulse generator function: RPLS pulse generator output; RPWM pulse width modulation

marking: CE

fixing mode: By clips (35 mm symmetrical DIN rail); By screws (panel with fixing kit); By screws (solid plate with fixing kit)

status LED: 1 LED per channel (green)I/O; 1 LED (green)10T; 1 LED (green)PWR; 1 LED (yellow)100T; 1 LED (yellow)STAT

net weight: 0.185 kg

IP degree of protection: IP20

immunity to microbreaks: 10 ms for supply circuit

dielectric strength: 500 V between I/O and earth terminals; 500 V between power supply and earth

standards: CSA; CSA C22.2 No 213 Class I Division 2 Group B; CSA C22.2 No 213 Class I Division 2 Group A; UL 508; CSA C22.2 No 213 Class I Division 2 Group C; EN 61131-2; CSA C22.2 No 213 Class I Division 2 Group D; IEC 61131-2

product certifications: cULus

ambient air temperature for operation: 0…55 °C

ambient air temperature for storage: -25…70 °C

relative humidity: 30…95 % without condensation

pollution degree: 2 conforming to EN 60664; 2 conforming to IEC 60664

operating altitude: 0...2000 m

storage altitude: 0…3000 m

vibration resistance: 0.075 mm at 10…57 Hz on 35 mm symmetrical DIN rail; 1 gn at 57…150 Hz on 35 mm symmetrical DIN rail

shock resistance: 15 gn for 11 ms conforming to EN 61131; 15 gn for 11 ms conforming to IEC 61131

resistance to electrostatic discharge: 4 kV in contact conforming to IEC 61000-4-2; 8 kV in air conforming to EN 61000-4-2; 8 kV in air conforming to IEC 61000-4-2; 4 kV in contact conforming to EN 61000-4-2

resistance to radiated fields: 10 V/m, radio frequency fields = 80000000…2000000000 Hz conforming to EN 61000-4-3; 10 V/m, radio frequency fields = 80000000…2000000000 Hz conforming to IEC 61000-4-3

resistance to fast transients: 1 kV (24 V solid state I/O) conforming to IEC 61000-4-4; 2 kV (24 V supply) conforming to IEC 61000-4-4

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP120609EN

Circularity Profile: ENVEOLI120606EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes