Skip to main content

Schneider-Electric
METSEPM2130

EasyLogic PM2130, Power & Energy meter, up to 31stH, LED, RS485, class 0.5S
Net discounted price 311.97 EUR
Available when ordered (delivery time: 8 working day(s))
Barcode: 3606480800153
Tariff code: 9028309000

Link to the manufacturers site: METSEPM2130 - EasyLogic PM2130, Power & Energy meter, up to 31stH, LED, RS485, class 0.5S

Main

Range: EasyLogic

Product name: EasyLogic PM2100

Device short name: PM2130

product or component type: Power meter

Complementary

device application: Sub billing; Power monitoring

Power quality analysis: total harmonic distortion; up to the 31st harmonic

Type of measurement: Apparent power min/max, total; Active and reactive power min/max, total; Current min/max, avg; Voltage min/max, avg; Frequency min/max, avg; Total current harmonic distortion THD (I) per phase; Total voltage harmonic distortion THD (U) per phase; Power factor min/max, avg; Apparent energy total; Active and reactive energy total

Metering type: Peak demand currents; Active power P, P1, P2, P3; Demand power P, Q, S; Reactive power Q, Q1, Q2, Q3; Apparent power S, S1, S2, S3; Active, reactive, apparent energy (signed, four quadrant); Voltage U, U21, U32, U13, V, V1, V2, V3; Current I, I1, I2, I3; Calculated neutral current; Unbalance current; Peak demand power PM, QM, SM

Accuracy class: Class 1 reactive energy conforming to IEC 62053-24; Class 0.5S active energy conforming to IEC 62053-22; Class 5 harmonic distorsion (I THD & U THD)

Measurement accuracy: Apparent power +/- 0.5 %; Active energy +/- 0.5 %; Reactive energy +/- 1 %; Active power +/- 0.5 %; Voltage +/- 0.5 %; Power factor +/- 0.01; Current +/- 0.5 %; Frequency +/- 0.05 %

Measurement current: 5…6000 mA

Measurement voltage: 35…480 V AC 50/60 Hz between phases; 20…277 V AC 50/60 Hz between phase and neutral; 480…999000 V AC 50/60 Hz with external VT

Frequency measurement range: 45…65 Hz

[Us] rated supply voltage: 80...277 V AC 45...65 Hz +/- 10 %; 100...277 V DC +/- 10 %

Network frequency: 50 Hz; 60 Hz

Ride-through time: 50 ms 120 V AC typical; 50 ms 230 V AC typical; 50 ms 125 V DC typical

[In] rated current: 1 A; 5 A

Maximum power consumption in VA: 8 VA at 277 V AC

Maximum power consumption in W: 3.3 W (power lines (AC)); 3.3 W at 277 V (power lines (DC))

Analogue input type: Current (impedance <= 0.3 mOhm); Voltage (impedance > 5 MOhm)

Tamperproof of settings: Protected by access code

Display type: 7 segments LED

Display colour: Red

Messages display capacity: 3 fields of 4 characters

Display digits: 12 digit(s) - 14.2 mm in height

Refresh time: Configurable from 1 to 60 min

Information displayed: Demand current (past value); Demand current (present value); Demand power (past value); Demand power (present value); Voltage; Current; Frequency; Energy consumption; Harmonic distortion; Power factor; Active power; Apparent power; Reactive power; Unbalanced in %

Control type: 3 x button

Local signalling: Red LED: output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh); Green LED: module operation and integrated communication

Number of inputs: 0

Number of outputs: 0

Communication port protocol: Modbus RTU at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none - 2 wires, insulation 2500 V

Communication port support: Screw terminal block: RS485

Data recording: Power logs; Time stamping; Energy consumption logs; Min/max for 8 parameters

Function available: Real time clock

Sampling rate: 64 samples/cycle

Cybersecurity: Enable/disable communication ports

Communication service: Remote monitoring

Product certifications: CE conforming to IEC 61010-1; CULus conforming to UL 61010-1; CULus conforming to CSA C22.2 No 61010-1; RCM; EAC; C-Tick

Mounting mode: Clip-on

Mounting position: Vertical

Mounting support: Framework

Provided equipment: 1 x installation guide

Measurement category: Category III 480 V; Category II 480…600 V

Electrical insulation class: Class II; Double insulation

Flame retardance: V-0 conforming to UL 94

Connections - terminals: Current transformer: screw connection (bottom) 6; Voltage inputs: screw connection (top) 4

Material: Polycarbonate

Width: 96 mm

Depth: Total : 76.09 mm; Embedded : 61.64 mm

Height: 96 mm

Net weight: 300 g

Compatibility code: PM2130

Environment

Service life: 7 year(s)

IP degree of protection: IP54 front: conforming to IEC 60529; IP30 body: conforming to IEC 60529

Relative humidity: 5…95 % at 50 °C

Pollution degree: 2

Ambient air temperature for operation: -10…60 °C

Ambient air temperature for storage: -25…70 °C

Operating altitude: <= 2000 m

Electromagnetic compatibility: Electrostatic discharge conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test conforming to IEC 61000-4-4; Surge immunity test conforming to IEC 61000-4-5; Conducted RF disturbances conforming to IEC 61000-4-6; Magnetic field at power frequency conforming to IEC 61000-4-8; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11; Emission tests conforming to FCC part 15 class A

Overvoltage category: III

Packing Units

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 11.500 cm

Package 1 Width: 12.000 cm

Package 1 Length: 12.500 cm

Package 1 Weight: 407.000 g

Unit Type of Package 2: S03

Number of Units in Package 2: 18

Package 2 Height: 30.000 cm

Package 2 Width: 30.000 cm

Package 2 Length: 40.000 cm

Package 2 Weight: 7.726 kg

Offer Sustainability

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Compliant with Exemptions

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP1510002

Circularity Profile: ENVEOLI1510002EN

© 2018 Alplan Kft.