Schneider-Electric
SSL1D03BD

Range of product: Harmony Solid State Relays

Device short name: SSL

Product or component type: Plug-in relay

Network number of phases: 1 phase

[Uc] control circuit voltage: 15...30 V

Output switching mode: DC switching

[Ui] rated insulation voltage: 30 V

Insulation resistance: > 100 MOhm at 500 V DC

Electromagnetic compatibility: Electrostatic discharge - test level: 4 kV criteria B (contact discharge) conforming to IEC 61000-4-2; Electrostatic discharge - test level: 8 kV criteria B (air discharge) conforming to IEC 61000-4-2; Conducted RF disturbances - test level: 10 V criteria A (0.15...80 MHz) conforming to IEC 61000-4-6; Radiated radio-frequency electromagnetic field immunity test - test level: 10 V/m criteria A (80 MHz to 1 GHz) conforming to IEC 61000-4-3; Radiated radio-frequency electromagnetic field immunity test - test level: 3 V/m criteria A (1.4…6 GHz) conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test - test level: 2 kV criteria B (5 kHz) conforming to IEC 61000-4-4; Electrical fast transient/burst immunity test - test level: 1 kV criteria B (5 kHz) conforming to IEC 61000-4-4; Surge immunity test - test level: 0.5 kV criteria B (line to line) conforming to IEC 61000-4-5; Surge immunity test - test level: 1 kV criteria B (line to earth) conforming to IEC 61000-4-5; Radiated emission - test level: 30...1000 Mhz conforming to IEC 60947-1; Conducted emission - test level: 0.15...30 Mhz conforming to IEC 60947-1

[Uimp] rated impulse withstand voltage: 3.5 kV for input to case conforming to IEC 62314; 3.5 kV for input/output circuit conforming to UL 508; 3.5 kV for input/output circuit conforming to IEC 62314; 3.5 kV output to case conforming to IEC 62314; 3.5 kV output to case; 3.5 kV for input to case conforming to UL 508; 3.5 kV output to case conforming to UL 508

Mounting support: Socket

[In] rated current: 3.5 A

Output voltage: 3...30 V DC

[Uc] control circuit voltage: 15...30 V DC

Capacitance unbalance: 2.5 pF input/output

Minimum switching voltage: 15 V DC turn-on

Maximum switching voltage: 10 V DC turn-off

Input current: 7 mA

Input impedance: 3500 Ohm

Solid state output type: Mosfet output; DC switching

Load current: 0.001…3.5 A

Absolute maximum voltage: 35 V

Maximum operating frequency: 500 Hz

Surge current: 9 A for 10 ms

Maximum voltage drop: <0.5 V on-state

Maximum leakage current: 0.001 mA off-state

Response time: 0.2 ms (turn-on); 0.1 ms (turn-off)

Overvoltage category: III

Width: 5 mm

Height: 28 mm

Depth: 15 mm

Net weight: 0.0041 kg

Device presentation: Complete product

Flame retardance: V0 conforming to UL 94

Dielectric strength: 2500 V for input/output

pollution degree: 2

Standards: IEC/EN 60947-1; IEC/EN 62314; UL 508; C22.2 No. 14

Product certifications: cURus; CSA; EAC; CE; UKCA

Marking: CE

IP degree of protection: IP00

Ambient air temperature for operation: -20…80 °C

Ambient air temperature for storage: -20…85 °C

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 1.500 cm

Package 1 Width: 0.500 cm

Package 1 Length: 2.800 cm

Package 1 Weight: 5.000 g

Unit Type of Package 2: BB1

Number of Units in Package 2: 12

Package 2 Height: 0.700 cm

Package 2 Width: 2.500 cm

Package 2 Length: 37.000 cm

Package 2 Weight: 64.000 g

Unit Type of Package 3: S01

Number of Units in Package 3: 1080

Package 3 Height: 15.000 cm

Package 3 Width: 15.000 cm

Package 3 Length: 40.000 cm

Package 3 Weight: 6.042 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP1307068EN

Circularity Profile: NA

Take-back: No

Carbon footprint (kg.eq.CO2 per CR, Total Life cycle) : 17