Schneider-Electric
BMXCPS4022H

Range of produc: Modicon X80

Product or component type: Power supply module

Product compatibility: All backplane

Product specific application: For severe environments

Function available: Temperature sensing; Uptime duration; Redundancy test; Remaining lifetime; Redundancy information

Primary voltage: 24...48 V

Supply circuit type: DC

Secondary power: 18 W 3.3 V DC at -25…70 °C I/O module logic power supply; 40 W 24 V DC at -25…70 °C I/O module power supply and processor if 3.3 V not loaded

Primary voltage limit: 18...62.4 V

Input current: 1.9 A 24 V; 1 A 48 V

Inrush current: 60 A 48 V; 60 A 24 V

I²t on activation: 1 A².s 24 V; 3 A².s 48 V

It on activation: 0.3 A.s 24 V; 0.4 A.s 48 V

MTBF reliability: 752000 H

Protection type: Internal fuse not accessible for primary circuit; Overload protection for secondary circuit; Overvoltage protection for secondary circuit; Short-circuit protection for secondary circuit

Current at secondary voltage: 5.5 A 3.3 V DC I/O module logic power supply; 1.67 A 24 V DC I/O module power supply and processor

maximum power dissipation in W: 8.5 W

Status LED: 1 LED (green) presence of voltages (OK); 1 LED (green) redundancy OK; 1 LED (green) power supply status

control type: RESET push-button cold restart

Electrical connection: 1 connector 2 pin(s)alarm relay; 1 connector 5 pin(s)line supply, protective earth

Maximum cable distance between devices: 10 m; 15 m

Insulation resistance: >= 100 MOhm primary/ground; >= 100 MOhm primary/secondary

Net weight: 0.81 kg

Immunity to microbreaks: 1 ms

Dielectric strength: 1500 V primary/ground; 1500 V primary/secondary

IP degree of protection: IP20

Directives: 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility; 2014/34/EU - ATEX directive

Product certifications: CE; UL; CSA; RCM; EAC; Merchant Navy; ATEX zone 2/22; IECEx zone 2/22

Standards: IEC 61131-2; IEC 61010-2-201; UL 61010-2-201; CSA C22.2 No 61010-2-201; IACS E10; EN/IEC 61000-6-5, interface type 1 and type 2; EN/IEC 61850-3, location G; IEC 60079-0

Environmental characteristic: Gas resistant class Gx conforming to ISA S71.04; Gas resistant class 3C4 conforming to IEC 60721-3-3; Dust resistant class 3S4 conforming to IEC 60721-3-3; Sand resistant class 3S4 conforming to IEC 60721-3-3; Salt resistant level 2 conforming to IEC 68252; Mold growth resistant class 3B2 conforming to IEC 60721-3-3; Fungal spore resistant class 3B2 conforming to IEC 60721-3-3; Hazardous location class I division 2

Ambient air temperature for storage: -40…85 °C

ambient air temperature for operation: -25…70 °C

Relative humidity: 10…95 % without condensation

Protective treatment: Conformal coating

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 9 cm

Package 1 Width: 18 cm

Package 1 Length: 25 cm

Package 1 Weight: 640 g

Unit Type of Package 2: S03

Number of Units in Package 2: 6

Package 2 Height: 30 cm

Package 2 Width: 30 cm

Package 2 Length: 40 cm

Package 2 Weight: 3.84 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 48

Package 3 Height: 70 cm

Package 3 Width: 60 cm

Package 3 Length: 80 cm

Package 3 Weight: 43.2 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins