Schneider-Electric
ABR2E111M

range of product: Interface for discrete signals

product or component type: Slim electromechanical input interface module

contacts type and composition: 1 NO

[Uc] control circuit voltage: 230...240 V

control circuit type: AC

control circuit frequency: 50/60 Hz

width pitch dimension: 9.5 mm

maximum [In] rated current: 0.015 A

short-circuit protection: 2 A external fuse type fast blow

[Ith] conventional free air thermal current: 1 A conforming to IEC 60947-1

local signalling: Green LED for control signal state

Quantity per set: Set of 5

control circuit voltage limits: 264 V

connections - terminals: Screw clamp terminal

operating threshold: 186 V

drop-out voltage: 48 V

holding current: 2.5 mA

power dissipation in W: 0.54 W 50 Hz; 0.77 W 60 Hz

maximum switching voltage: 125 V DC; 140 V AC

[Ue] rated operational voltage: <= 100 V DC conforming to IEC 60947-5-1 for built-in contacts; <= 127 V AC conforming to IEC 60947-5-1 for built-in contacts

network frequency: 50/60 Hz

[Ie] rated operational current: 1 A AC-12 Ue: 127 V per 1000000 cycles conforming to IEC 60947-5-1; 1 A DC-12 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1; 1 A DC-13 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1; 0.5 A AC-14 Ue: 127 V per 1000000 cycles conforming to IEC 60947-5-1; 0.5 A AC-15 Ue: 127 V per 1000000 cycles conforming to IEC 60947-5-1

minimum switching current: 1 mA

minimum switching voltage: 5 V

electrical reliability: 1e-008

operating time: <= 30 ms between de-energisation of coil and closing of NO contact AC; <= 30 ms between energisation of coil and closing of NO contact AC

contact bounce time: <= 5 ms

operating rate in Hz: 10 Hz at no-load; 0.5 Hz at Ie

mechanical durability: 20000000 cycles

[Ui] rated insulation voltage: 250 V conforming to VDE 0110 group C; 300 V conforming to IEC 60947-1

flame retardance: V0 conforming to UL 94

cable cross section: 0.27…4 mm², 1 wire rigid; 0.34…2.5 mm², 1 or 2 wires flexible with cable end; 0.6…2.5 mm², 1 or 2 wires flexible without cable end

operating position: Any position

installation category: II conforming to IEC 60947-1

mounting support: Combination rail; Asymmetrical DIN rail; Symmetrical DIN rail

net weight: 0.036 kg

immunity to microbreaks: 10 ms

dielectric strength: 2000 V between coil circuit and contact circuits; 2500 V between wired interface and earth; 750 V between open contacts

standards: IEC 60947-5-1

product certifications: UL; DNV; LROS (Lloyds register of shipping); CSA; BV

IP degree of protection: IP20 conforming to IEC 60529

protective treatment: TC

fire resistance: 960 °C conforming to IEC 60695-2-1

shock resistance: 30 gn for 11 ms conforming to IEC 60068-2-27

vibration resistance: 3 gn conforming to IEC 60068-2-6 (f = 10…150 Hz)

electromagnetic compatibility: 1.2/50 µs shock waves immunity test conforming to IEC 947-1; Electromagnetic field immunity test, level 3 10 V/m between 27...1000 MHz conforming to IEC 61000-4-3; Electrostatic discharge immunity test, level 3 8 kV conforming to IEC 61000-4-2; Rapid transients immunity test, level 3 on input/output 1 kV conforming to IEC 61000-4-4; Rapid transients immunity test, level 3 on power supply 2 kV conforming to IEC 61000-4-4

ambient air temperature for operation: -25…70 °C at Us; -5…40 °C unrestricted operation; -5…55 °C from 0.85...1.1 Us

ambient air temperature for storage: -40…80 °C

operating altitude: <= 3000 m

pollution degree: 2 conforming to IEC 60947-1

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP1704005EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins