Schneider-Electric
BMH0703T16F2A

Product or component type: Servo motor

Device short name: BMH

Maximum mechanical speed: 8000 rpm

Continuous stall torque: 3.4 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 3.4 N.m for LXM32.D18M2 at 6 A, 230 V, single phase

Peak stall torque: 8.7 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 10.2 N.m for LXM32.D18M2 at 6 A, 230 V, single phase

Nominal output power: 650 W for LXM32.D30M2 at 10 A, 115 V, single phase; 900 W for LXM32.D18M2 at 6 A, 230 V, single phase

Nominal torque: 3.1 N.m for LXM32.D30M2 at 10 A, 115 V, single phase; 2.9 N.m for LXM32.D18M2 at 6 A, 230 V, single phase

Nominal speed: 2000 rpm for LXM32.D30M2 at 10 A, 115 V, single phase; 3000 rpm for LXM32.D18M2 at 6 A, 230 V, single phase

Product compatibility: LXM32.D30M2 at 115 V single phase; LXM32.D18M2 at 230 V single phase

Shaft end: Keyed

IP degree of protection: IP54 standard

Speed feedback resolution: 32768 points/turn

Holding brake: With

mounting support: International standard flange

Electrical connection: Rotatable right-angled connectors

Range compatibility: Lexium 32

[Us] rated supply voltage: 240 V

Network number of phases: Three phase

Continuous stall current: 5.55 A

Continuous power: 1.68 W

Maximum current Irms: 15 A for LXM32.D30M2; 17.8 A for LXM32.D18M2

Maximum permanent current: 17.84 A

Second shaft: Without second shaft end

Shaft diameter: 14 mm

Shaft length: 30 mm

Key width: 20 mm

Feedback type: Single turn SinCos Hiperface

Holding torque: 3 N.m holding brake

Motor flange size: 70 mm

Number of motor stacks: 3

Torque constant: 0.61 N.m/A at 120 °C

Back emf constant: 39.3 V/krpm at 120 °C

Number of motor poles: 10

Rotor inertia: 1.78 kg.cm²

Stator resistance: 1.32 Ohm at 20 °C

Stator inductance: 4.3 mH at 20 °C

Stator electrical time constant: 3.3 ms at 20 °C

Maximum radial force Fr: 730 N at 1000 rpm; 580 N at 2000 rpm; 510 N at 3000 rpm; 460 N at 4000 rpm; 430 N at 5000 rpm; 400 N at 6000 rpm

Maximum axial force Fa: 0.2 x Fr

Brake pull-in power: 7 W

Type of cooling: Natural convection

Length: 225 mm

Centring collar diameter: 60 mm

Centring collar depth: 2.5 mm

Number of mounting holes: 4

Mounting holes diameter: 5.5 mm

Circle diameter of the mounting holes: 82 mm

Net weight: 4 kg

Sizing reference: BMH0703T

Network number of phases: 3

Accuracy error [angular]: 4.8 °

Coefficient 1_1: -0.0001750000000006 N.m/rpm

Coefficient 1_2: 0.0000000000000000011550721732 N.m/rpm²

Coefficient 1_3: -0.0000000000000000000006762416 N.m/rpm3

Coefficient 1_4: 0.0000000000000000000000001737 N.m/rpm4

Coefficient 1_5: -0.0000000000000000000000000000202562 N.m/rpm5

Coefficient 1_6: 0.00000000000000000000000000000000087 N.m/rpm6

Saturation coefficient 1: -0.0000000000000000153406885169

Saturation coefficient 2: -0.0052093973442288

Saturation coefficient 3: 0.0000000000000000008051345425

Coefficient 2_1: 0.0000212500000000002 N.m/rpm

Temperature copper hot: 135 °C

Temperature magnet hot: 100 °C

Temperature magnet rt: 20 °C

Motor voltage drop coefficient: 1

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 11.0 cm

Package 1 Width: 20.0 cm

Package 1 Length: 40.0 cm

Package 1 Weight: 3.2 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP111002EN

Circularity Profile: N/A

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes