Schneider-Electric
18264

Range of produc: RED

Range: Acti9

Product or component type: Residual current circuit breaker (RCCB)

Device short name: REDs

Protection type: Recloser

Poles description: 4P

Neutral position: Left

Signal contacts composition: 1NO or 1NC or intermittent 1 Hz

[In] rated current: 25 A

Earthing system: TT; TN-S

Network type: AC

Earth-leakage sensitivity: 30 mA

device location in system: Outgoer

Network frequency: 50 Hz

[Ue] rated operational voltage: 400 V AC 50 Hz phase to neutral

Reset: Fault reset earth leakage

Test function: Manual at > 170 V

earth-leakage protection time delay: Instantaneous

Earth-leakage protection class: Type A

Minimum leakage resistance: 16 kOhm at operating; 8 kOhm at non-operating

[Im] rated making and breaking capacity: Idm 630 A 400 V

Rated conditional short-circuit current: Inc: 6 kA - associated with DPN, 40 A; Inc: 10 kA - associated with DPNN, 40 A; Inc: 10 kA - associated with iC60N, 25 A; Inc: 10 kA - associated with iC60H, 25 A; Inc: 10 kA - associated with iC60L, 25 A; Inc: 10 kA - associated with NG125, 25 A; Inc: 10 kA - associated with gG fuse, 25 A

[Ui] rated insulation voltage: 500 V

[Uimp] rated impulse withstand voltage: 4 kV

Surge current: 250 A

control type: Toggle

Local signalling: 2 LEDs; Residual current device : ON/OFF indication; Recloser : ON/OFF indication

Operating mode: Reclosing time: < 10 s; Max nb of consecutive restart: 3; Min interval between 2 closings: 30 s; Stopping restart cycle if insulation fault present: 15 min; Insulation fault presence monitoring

Insulation fault diagnosis: If fault detected, diagnosis every 2 minutes

Signalling circuit voltage: AC: 5...230 V; DC: 5...230 V

Signalling output current: 0.6 mA min; 100 mA max, cos phi =1

Mounting mode: Fixed

mounting support: 35 mm symmetrical DIN rail

9 mm pitches: 14

height: 98 mm

Width: 125 mm

Depth: 79.5 mm

Embedding depth: 73.5 mm

Net weight: 0.67 kg

Mechanical durability: 4000 cycles open-close

Connections - terminals: Guard tunnel terminal 35 mm² rigid; Guard tunnel terminal 35 mm² flexible; Guard tunnel terminal 35 mm² flexible with ferrule

Auxiliary connection terminal: Tunnel type terminal in 2.5 mm² flexible; Tunnel type terminal in 2.5 mm² rigid; Tunnel type terminal in 2.5 mm² flexible with ferrule

Wire stripping length: Power circuit: 12 mm; Signaling: 9 mm

Tightening torque: Power circuit: 2 N.m; Signaling: 0.4 N.m

Market segment: Small commercial

Compatibility code: REDs

Standards: EN 61008; IEC 61008

IP degree of protection: IP20

Pollution degree: 2

Electromagnetic compatibility: 8/20 µs wave immunity, 250 A

Tropicalisation: 2

Relative humidity: 95 % at 55 °C

ambient air temperature for operation: -5…40 °C

Ambient air temperature for storage: -20…60 °C

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 12 cm

Package 1 Width: 14 cm

Package 1 Length: 17 cm

Package 1 Weight: 731 g

Unit Type of Package 2: S03

Number of Units in Package 2: 8

Package 2 Height: 30 cm

Package 2 Width: 30 cm

Package 2 Length: 40 cm

Package 2 Weight: 6.43 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Compliant with Exemptions

China RoHS Regulation: Product out of China RoHS scope. Substance declaration for your information

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins