Schneider-Electric
XACB6933

Range of produc: Harmony XAC

Product or component type: Pendant control station

Device short name: XACB

Control station type: Double insulated

Enclosure material: Glass reinforced polyester

Electrical circuit type: Power circuit

enclosure type: Complete ready for use

Control station application: Control of single speed hoist motor

Control station composition: 6 push-buttons + 1 emergency stop

Control button type: Stop push-button Ø 40 mm 3 NC latching; First push-button 3-pole raise, slow; Second push-button 3-pole lower, slow; Fourth push-button 3-pole left, slow; Third push-button 3-pole right, slow; Fifth push-button 3-pole forward slow; Sixth push-button 3-pole reverse, slow

Product compatibility: XESD2201 for reversing operation; XACS499 for emergency stop

Mechanical interlocking: With mechanical interlocking between pairs

Control station colour: Yellow

Connections - terminals: Screw clamp terminals, 1 x 2.5 mm² with or without cable end; Screw clamp terminals, 2 x 1.5 mm² with or without cable end

Standards: EN/IEC 60947-5-1; EN/IEC 60204-32; CSA C22.2 No 14

product certifications: CSA type 4

Protective treatment: TH

ambient air temperature for operation: -25…70 °C

Ambient air temperature for storage: -40…70 °C

Vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

Shock resistance: 100 gn conforming to IEC 60068-2-27

Overvoltage category: Class II conforming to IEC 61140

IP degree of protection: IP65 conforming to IEC 60529

Mechanical durability: 1000000 cycles

Cable entry: Rubber sleeve with stepped entry 10…22 mm

[Ithe] conventional enclosed thermal current: 20 A

[Ui] rated insulation voltage: Emergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1; 300 V conforming to CSA

[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1

contact operation: Snap action

Operating force: 32 N push-button; 40 N emergency stop

Short-circuit protection: 12 A fuse protection by cartridge fuse type aM

Rated power in hp: 3 hp at 240 V

Rated operational power in W: 3000 W at 240 V; 3000 W at 400 V

Electrical durability: 1000000 cycles AC-3, 3000 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 1000000 cycles AC-4, 3000 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 700000 cycles AC-3, 3000 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 700000 cycles AC-4, 3000 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A

Terminals description ISO n°1: (23-24)NO; (53-54)NO; (13-14)NO; (63-64)NO; (73-74)NO; (33-34)NO

Terminals description ISO n°2: (31-32)NC; (11-12)NC; (21-22)NC

Terminal identifier: (13-14)NO; (11-12)NC

Net weight: 1.61 kg

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 10.5 cm

Package 1 Width: 10.5 cm

Package 1 Length: 74.0 cm

Package 1 Weight: 1.94 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins