Schneider-Electric
SD328AU25S2

Range of produc: Lexium SD3

Product or component type: Motion stepper drive

Device short name: SD328

Supply voltage limits: 200…240 V; 100…120 V

Bus type: Fieldbus

Format of the drive: Block

Network number of phases: Single phase

[Us] rated supply voltage: 100...120 V - 15...10 %; 200...230 V - 15...10 %

Supply voltage type: AC/DC

Network frequency limits: 50…60 Hz (- 15...10 %)

Communication interface: CANopen, integrated; Analogue input, integrated; Modbus, integrated

Maximum motor phase current: 2.5 A

Current consumption: 3 A 230 V main supply; 4 A 115 V main supply; <= 0.2 mA 24 V control voltage

Nominal power: 180 W at 115 V; 270 W at 230 V

Short-circuit current: 0.5 kA

Power losses: <= 26 W

Associated fuse rating: 6 A at 115 V; 6 A at 230 V

Overvoltage category: III

Inrush current: 60 A

Maximum leakage current: 30 mA <10 m IEC 60990-3

Voltage state 0 guaranteed: -3...5 V for 24 V input signals

Voltage state 1 guaranteed: 15...30 V for 24 V input signals

Input current: 10 mA for 24 V input signals

Maximum input frequency: 200 kHz for signal input ENC_A, ENC_B, ENC_I - control type pulse/direction; 400 kHz for signal input ENC_A, ENC_B, ENC_I - control type A/B

Maximum output frequency: 400 kHz for pulse/direction interface A/B; 200 kHz for pulse/direction interface pulse/direction

Maximum switching current: 50 mA (24 V output signals)

Maximum voltage drop: <1 V 50 mA load for 24 V output signals

Physical interface: 2-wire RS 485 Modbus: ; RS422 - pulse/direction interface; RS422 - signal input ENC_A, ENC_B, ENC_I

Output voltage: <= 30 V (24 V output signals); 4.75...5.25 V (ENC+5V_OUT signal output)

Input voltage: 24 V -15 %/+20 % for 24 V control voltage; -10...10 V for analogue input signals

Residual ripple: < 5 % (24 V control voltage)

Resistance: 5 kOhm (pulse/direction interface); 10 kOhm (analogue input signals)

Analogue input type: Voltage - 10...10 V, resolution: 14 bits, duration: 0.25 ms

Electrical connection: Connector RJ45 for CANopen interface; Connector RJ45 for Modbus interface; Spring terminal for CANopen interface

Mode of transmission: RTU for Modbus

Method of access: Slave CANopen

Transmission rate: 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen; 9600, 19200, 38400 bps for Modbus

Number of addresses: 1…127 for CANopen; 1…247 for Modbus

Installed device: 127 stepper motor drives for CANopen; 31 stepper motor drives for Modbus

Data format: 8 bits, 1 stop, even parity for Modbus; 8 bits, no parity, 1 stop for Modbus; 8 bits, no parity, 2 stop for Modbus; 8 bits, odd parity, 1 stop for Modbus

Communication service: 1 PDO configurable for CANopen; 2 SDOs receive for CANopen; 2 SDOs send for CANopen; 3 PDOs as per DSP 402 for CANopen; CiA DSP 402 profile for CANopen; Diagnostics (08) for Modbus; Emergency for CANopen; Note guarding, heartbeat for CANopen; Read device identification (43) for Modbus; Read hold register (03), maximum 63 words for Modbus; Read/write multiple registers (23), maximum 63/59 words for Modbus; Write multiple registers (16), maximum 61 words for Modbus; Write single register (06) for Modbus

Local signalling: 1 LED - ERR for CANopen; 1 LED - RUN for CANopen

Safety function: Safe torque off safety function for machine conforming to IEC/EN 61800-5-2; Safe torque off safety function for machine conforming to ISO 13849-1 level d; Safe torque off safety function for system process conforming to EN/IEC 61508 level SIL2; Safe torque off safety function for system process conforming to IEC/EN 61800-5-2

Type of cooling: Natural convection

Maximum mechanical speed: 3000 rpm

height: 145 mm

Width: 72 mm

Depth: 140 mm

Shock resistance: 15 gn for 11 ms conforming to IEC 60068-2-27

Net weight: 1.1 kg

Supply voltage description: Single phase 230 V; Single phase 115 V

Network number of phases: 1

Compatibility code: SD328

Electromagnetic compatibility: Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5

Standards: IEC 61800-3; IEC 61800-5-1; EN/IEC 61800-3 environment 2; IEC 50178; IEC 61800-3 environment 1

product certifications: UL; cUL; TÜV

Marking: CE

Ambient air temperature for operation: 0…50 °C

Ambient air temperature for storage: -25…70 °C

Pollution degree: Level 2

Relative humidity: 5…85 % without condensation

Operating altitude: <= 1000 m without derating; > 1000...< 2000 m without derating (maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm)

Vibration resistance: 1 gn (f= 13…150 Hz) conforming to IEC 60068-2-6; 1.5 mm (f= 3…13 Hz) conforming to IEC 60068-2-6

IP degree of protection: IP20; On upper part: IP40 (without removal of protective film)

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 13.500 cm

Package 1 Width: 16.500 cm

Package 1 Length: 19.000 cm

Package 1 Weight: 1.257 kg

Unit Type of Package 2: P06

Number of Units in Package 2: 46

Package 2 Height: 75.000 cm

Package 2 Width: 60.000 cm

Package 2 Length: 80.000 cm

Package 2 Weight: 70.882 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP111115EN

Circularity Profile: ENVEOLI111103EN

PVC free: Yes