Schneider-Electric
ILE2K661PB1A8

Range of produc: Lexium integrated drive

Product or component type: Motion integrated drive

Device short name: ILE

Motor type: Brushless DC motor

Number of motor poles: 6

Network number of phases: Single phase

[Us] rated supply voltage: 48 V; 24 V

Network type: DC

Communication interface: Ethernet/IP, integrated

Length: 229 mm

Winding type: Medium speed of rotation and medium torque

Electrical connection: Printed circuit board connector

Holding brake: Without

Gear box type: Worm gear, 3 stages

Reduction ratio: 115:1 (3675:32)

Nominal speed: 35 rpm at 24 V; 35 rpm at 48 V

Nominal torque: 10.6 N.m at 24 V; 10.6 N.m at 48 V

Transmission rate: 125, 250, 500 kbauds

mounting support: Flange

Motor flange size: 66 mm

Number of motor stacks: 1

Centring collar diameter: 36 mm

Number of mounting holes: 2

Mounting holes diameter: 4.4 mm

Feedback type: BLDC encoder

Shaft end: Hole

Second shaft: Without second shaft end

Supply voltage limits: 18…55.2 V

Current consumption: 7000 mA peak; 5500 mA maximum continuous

Associated fuse rating: 16 A

Commissioning interface: RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)

input/output type: 4 signals (each be used as input or output)

Voltage state 0 guaranteed: -3...4.5 V

Voltage state 1 guaranteed: 15...30 V

Discrete input current: 10 mA at 24 V on/STO_A for safety input; 3 mA at 24 V on/STO_B for safety input; 2 mA at 24 V for 24 V signal interface

Discrete output voltage: 23...25 V

Maximum switching current: 100 mA per output; 200 mA total

Protection type: Overload of output voltage; Safe torque off; Short circuit of the output voltage

Maximum supply current: 0.1 A (power stage disabled); 6.8 A at 24 V; 2.9 A at 48 V

Nominal output power: 37 W at 24 V; 39 W at 48 V

Peak stall torque: 24.72 N.m at 24 V; 24.72 N.m at 48 V

Continuous stall torque: 14 N.m

Detent torque: 16.7 N.m

Speed feedback resolution: 12 points/turn motor; 0.26° gearbox output

accuracy error: +/- 1 point

Rotor inertia: 1980 kg.cm²

Maximum mechanical speed: 44 rpm

Maximum radial force Fr: 200 N

Maximum axial force Fa: 80 N

Service life in hours: 9000 h bearing

Marking: CE

Type of cooling: Natural convection

Net weight: 2.3 kg

Sizing reference: ILE2_661_A8

Supply voltage description: Single phase 24 V DC; Single phase 48 V DC

Network number of phases: 1

Coefficient M0: 0.09953125 N.m/rpm

Coefficient M0 max: 0.09953125 N.m/rpm

Voltage 1: 24 V

Voltage 1 speed 1: 30.476 rpm

Voltage 1 speed 1 max: 30.476 rpm

Coefficient 1_0: 14.7 N.m

Coefficient 1_1: -0.1225 N.m/rpm

Voltage 2: 48 V

Voltage 2 speed 2: 30.476 rpm

Voltage 2 speed 2 max: 30.477 rpm

Coefficient 2_0: 14 N.m

Coefficient 2_1: -0.09953125 N.m/rpm

Curve type: Lin

Accuracy error [angular]: 1 °

Reduction ratio: 115

Compatibility code: ILE

Standards: IEC 50347; EN 61800-3:2001, second environment; IEC 60072-1; EN 61800-3 : 2001-02; IEC 61800-3, Ed 2; IEC 61800-3; IEC 50178

product certifications: UL; cUL; TÜV

Ambient air temperature for operation: 40…55 °C (with power derating of 2 % per °C); 0…40 °C (without derating)

Permissible ambient air temperature around the device: 105 °C power amplifier; 110 °C motor

Ambient air temperature for storage: -25…70 °C

Operating altitude: <= 1000 m without derating

Relative humidity: 15…85 % without condensation

Vibration resistance: 20 m/s² (f= 10…500 Hz) 10 cycles conforming to IEC 60068-2-6

Shock resistance: 150 m/s² 1000 shocks conforming to IEC 60068-2-29

IP degree of protection: IP41 shaft bushing: conforming to IEC 60034-5; IP54 total except shaft bushing: conforming to IEC 60034-5

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 10.4 cm

Package 1 Width: 18.0 cm

Package 1 Length: 36.5 cm

Package 1 Weight: 2.3 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP1411012EN

Circularity Profile: ENVEOLI1411012EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

PVC free: Yes