Schneider-Electric
XACD22P3111

Range of produc: Harmony XAC

Product or component type: Pendant control station

Device short name: XACD

Control station type: Double insulated

Enclosure material: Polypropylene

control type: Intuitive

Electrical circuit type: Power circuit

enclosure type: Complete ready for use

Control station application: Control of single speed hoist motor

Motor starter type: Reversing

Control station composition: 1 2-directional button + 1 emergency stop

Control button type: Stop push-button Ø 30 mm 3 NC latching; First direction button 2-pole raise, slow; Second direction button 2-pole lower, slow

Product compatibility: XEDS3111 for reversing operation; XENT1991 for emergency stop

Mechanical interlocking: With mechanical interlocking

Control station colour: Yellow

Connections - terminals: Screw clamp terminals, 1 x 2.5 mm² with or without cable end; Screw clamp terminals, 2 x 1.5 mm² with or without cable end

Standards: UL 508; EN/IEC 60204-32; CSA C22.2 No 14; EN/IEC 60947-5-1

Protective treatment: TH

ambient air temperature for operation: -25…70 °C

Ambient air temperature for storage: -40…70 °C

Vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

Shock resistance: 100 gn conforming to IEC 60068-2-27

Overvoltage category: Class II conforming to IEC 61140

IP degree of protection: IP65 conforming to IEC 60529

IK degree of protection: IK08 conforming to EN 50102

Mechanical durability: 3000000 cycles

Cable entry: Rubber sleeve with stepped entry 7…18 mm

[Ithe] conventional enclosed thermal current: 10 A XENT....; 16 A XEDS....

[Ui] rated insulation voltage: 500 V (pollution degree 3) conforming to IEC 60947-1; Emergency stop contact: 400 V (pollution degree 3)

[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1; 4 kV emergency stop contact

contact operation: Snap action

Operating force: 28 N

Short-circuit protection: 6 A fuse protection by cartridge fuse type aM

Rated operational power in W: 2200 W AC-3 at 400 V conforming to IEC 60947-3 appendix A; 2200 W AC-4 at 400 V conforming to IEC 60947-3 appendix A; 3000 W AC-23B at 400 V

Electrical durability: 1000000 cycles AC-3, 2200 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 1000000 cycles AC-4, 2200 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A

Terminals description ISO n°1: (1-2)P; (5-6)P; (3-4)P; (7-8)P

Terminals description ISO n°2: (31-32)NC; (11-12)NC; (21-22)NC

Terminal identifier: (13-14)NO; (11-12)NC

Net weight: 0.41 kg

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 9.0 cm

Package 1 Width: 12.0 cm

Package 1 Length: 32.0 cm

Package 1 Weight: 547.0 g

Unit Type of Package 2: S03

Number of Units in Package 2: 6

Package 2 Height: 30.0 cm

Package 2 Width: 30.0 cm

Package 2 Length: 40.0 cm

Package 2 Weight: 3.958 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins