Schneider-Electric
XACD22P2241

range of product: Harmony XAC

product or component type: Pendant control station

device short name: XACD

control station type: Double insulated

enclosure material: Polypropylene

control type: Intuitive

electrical circuit type: Power circuit

enclosure type: Complete ready for use

control station application: Control of 2-speed hoist motor

motor starter type: Reversing

control station composition: 1 2-directional button + 1 emergency stop

control button type: Stop push-button Ø 30 mm 3 NC latching; First direction button 1 NO (brake) 2-pole raise, slow-fast; Second direction button 1 NO (brake) 2-pole lower, slow-fast

product compatibility: XEDS2241 for reversing operation; XENT1991 for emergency stop

mechanical interlocking: With mechanical interlocking

control station colour: Yellow

connections - terminals: Screw clamp terminals, 1 x 2.5 mm² with or without cable end; Screw clamp terminals, 2 x 1.5 mm² with or without cable end

standards: UL 508; EN/IEC 60204-32; EN/IEC 60947-5-1; CSA C22.2 No 14

protective treatment: TH

ambient air temperature for operation: -25…70 °C

ambient air temperature for storage: -40…70 °C

vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

shock resistance: 70 gn conforming to IEC 60068-2-27

overvoltage category: Class II conforming to IEC 61140

IP degree of protection: IP65 conforming to IEC 60529

IK degree of protection: IK08 conforming to EN 50102

mechanical durability: 3000000 cycles

cable entry: Rubber sleeve with stepped entry 7…18 mm

[Ithe] conventional enclosed thermal current: 10 A XENT....; 16 A XEDS....

[Ui] rated insulation voltage: 500 V (pollution degree 3) conforming to IEC 60947-1; Emergency stop contact: 400 V (pollution degree 3)

[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1; 4 kV emergency stop contact

contact operation: Snap action

operating force: 31 N

short-circuit protection: 6 A fuse protection by cartridge fuse type aM

rated operational power in W: 1100 W AC-3 at 400 V conforming to IEC 60947-3 appendix A; 1100 W AC-4 at 400 V conforming to IEC 60947-3 appendix A; 3000 W AC-23B at 400 V

electrical durability: 1000000 cycles AC-3, 1100 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 1000000 cycles AC-4, 1100 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A

terminals description ISO n°1: (11-12)P; (5-6)P; (13-14)NO; (3-4)P; (15-16)NO; (1-2)P; (R1-R2)RP; (9-10)P; (7-8)P; (R3-R4)RP

terminals description ISO n°2: (11-12)NC; (21-22)NC; (31-32)NC

terminal identifier: (11-12)NC; (13-14)NO

net weight: 0.42 kg

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins