Schneider-Electric
XACB2191

range of product: Harmony XAC

product or component type: Pendant control station

device short name: XACB

control station type: Double insulated

enclosure material: Glass reinforced polyester

electrical circuit type: Power circuit

enclosure type: Complete ready for use

control station application: Control of single speed hoist motor

control station composition: 2 push-buttons + 1 emergency stop

control button type: First push-button 2-pole raise, slow; Second push-button 2-pole lower, slow; Emergency stop push-button Ø 40 mm

product compatibility: XESD1191 for reversing operation

mechanical interlocking: With mechanical interlocking

control station colour: Yellow

connections - terminals: Screw clamp terminals, 1 x 2.5 mm² with or without cable end; Screw clamp terminals, 2 x 1.5 mm² with or without cable end

standards: EN/IEC 60204-32; EN/IEC 60947-5-1; CSA C22.2 No 14

product certifications: CSA type 4

protective treatment: TH

ambient air temperature for operation: -25…70 °C

ambient air temperature for storage: -40…70 °C

vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

shock resistance: 100 gn conforming to IEC 60068-2-27

overvoltage category: Class II conforming to IEC 61140

IP degree of protection: IP65 conforming to IEC 60529

mechanical durability: 1000000 cycles

cable entry: Rubber sleeve with stepped entry 10…22 mm

[Ithe] conventional enclosed thermal current: 12 A

[Ui] rated insulation voltage: 500 V (pollution degree 3) conforming to IEC 60947-1; 600 V conforming to CSA

[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1

contact operation: Snap action

operating force: 17 N push-button

short-circuit protection: 10 A fuse protection by cartridge fuse type aM

rated power in hp: 2 hp at 240 V, CSA certified; 3 hp at 600 V, CSA certified; 5 hp at 400 V, CSA certified

rated operational power in W: 2200 W AC-3 at 240 V conforming to IEC 60947-3 appendix A; 2200 W AC-3 at 400 V conforming to IEC 60947-3 appendix A; 2200 W AC-4 at 240 V conforming to IEC 60947-3 appendix A; 2200 W AC-4 at 400 V conforming to IEC 60947-3 appendix A

electrical durability: 300000 cycles AC-3, 2200 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 300000 cycles AC-3, 2200 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 300000 cycles AC-4, 2200 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 300000 cycles AC-4, 2200 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 500000 cycles AC-3, 1500 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 500000 cycles AC-4, 1500 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 800000 cycles AC-3, 1500 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A; 800000 cycles AC-4, 1500 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A

terminal identifier: (11-12)NC; (13-14)NO

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins