Schneider-Electric
XACA68141

Range of produc: Harmony XAC

Product or component type: Pendant control station

Device short name: XACA

Control station type: Double insulated

Enclosure material: Polypropylene

Electrical circuit type: Control circuit

enclosure type: Complete ready for use

Control station application: Control of single speed hoist motor

Control station composition: 6 push-buttons + 1 emergency stop

Control button type: First push-button 1 NC + 1 NO raise, slow; Second push-button 1 NC + 1 NO lower, slow; Emergency stop push-button Ø 40 mm 3 NC trigger action; Fourth push-button 1 NC + 1 NO left, slow; Third push-button 1 NC + 1 NO right, slow; Fifth push-button 1 NC + 1 NO forward slow; Sixth push-button 1 NC + 1 NO reverse, slow

Product compatibility: ZB2BE102 + ZB2BE101 for each direction; XENT1192 for emergency stop

Mechanical interlocking: With mechanical interlocking between pairs

Control station colour: Yellow

Connections - terminals: Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end; Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end

Standards: EN/IEC 60947-5-1; CSA C22.2 No 14; EN/IEC 60947-5-5; UL 508; EN/ISO 13850: 2006; EN/IEC 60204-32

product certifications: GOST; CCC

Protective treatment: TH

ambient air temperature for operation: -25…70 °C

Ambient air temperature for storage: -40…70 °C

Vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

Shock resistance: 100 gn conforming to IEC 60068-2-27

Overvoltage category: Class II conforming to IEC 61140

IP degree of protection: IP65 conforming to IEC 60529

IK degree of protection: IK08 conforming to EN 50102

Mechanical durability: 1000000 cycles

Cable entry: Rubber sleeve with stepped entry 8…26 mm

Contact code designation: A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A; A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A; Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A; Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A

[Ithe] conventional enclosed thermal current: 10 A

[Ui] rated insulation voltage: Emergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1; 600 V (pollution degree 3)

[Uimp] rated impulse withstand voltage: 6 kV conforming to IEC 60947-1

contact operation: Slow-break

Maximum resistance across terminals: 25 MOhm

Operating force: 13 N push-button; 14 N emergency stop

Short-circuit protection: 10 A fuse protection by cartridge fuse type gG

Rated operational power in W: 40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C; 48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C; 65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C

Terminals description ISO n°1: (11-12)NC; (13-14)NO

Terminals description ISO n°2: (21-22)NC; (31-32)NC; (11-12)NC

Terminal identifier: (13-14)NO; (11-12)NC

Net weight: 0.97 kg

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 8.5 cm

Package 1 Width: 9.0 cm

Package 1 Length: 35.0 cm

Package 1 Weight: 600.0 g

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP070905EN

Circularity Profile: N/A

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins