Schneider-Electric
RM35BA10

Range of produc: Harmony Control Relays

Relay type: Pump control relays

Product or component type: Pump control relay

Product specific application: For 3-phase and single-phase pump

Relay name: RM35BA

Relay monitored parameters: Overcurrent and undercurrent control; Phase sequence on 3-phase supply; Phase failure on 3-phase supply

Time delay type: Adjustable 1...60 s, +/- 10 % Ti on energisation; Fixed 0.3 s reset on terminal Y2; Adjustable 0.1...10 s, +/- 10 % Tt on crossing the threshold

Switching capacity in VA: 1250 VA

Minimum switching current: 10 mA at 5 V DC

Maximum switching current: 5 A AC/DC

Maximum power consumption in VA: 5 VA AC

Measurement range: 1...10 A AC

Utilisation category: AC-12 conforming to IEC 60947-5-1; AC-13 conforming to IEC 60947-5-1; AC-14 conforming to IEC 60947-5-1; AC-15 conforming to IEC 60947-5-1; DC-12 conforming to IEC 60947-5-1; DC-13 conforming to IEC 60947-5-1

[Uc] control circuit voltage: 208...480 V; 230 V

Connections - terminals: Screw connectors

Contacts type and composition: 1 C/O

[In] rated current: 5 A

Reset time: 2000 ms

Maximum switching voltage: 250 V AC/DC

Supply voltage limits: 183…528 V AC

Control circuit voltage limits: - 15 % + 10 % Un

Resistance across terminals: 0.01 Ohm at E1-L2 terminals

Width: 35 mm

Output contacts: 1 C/O

Nominal output current: 5 A

Maximum measuring cycle: 140 ms as true rms value

run-up delay at power-up: 0.5 s

Hysteresis: 5 % of threshold

Measurement accuracy: +/- 10 % of the full scale value

Repeat accuracy: +/- 1 % for input and measurement circuit; +/- 1 % for time delay

Measurement error: 1 % by volt over the whole range; +/- 0.05 %/°C

Response time: < 300 ms (in the event of a fault)

Input current: 11 A permanent at 25 °C E1-L2 terminals; 50 A non repetitive < 1 s at 25 °C E1-L2 terminals

Marking: CE : EMC 89/336/EEC; CE : 73/23/EEC

Overvoltage category: III conforming to IEC 60664-1

Insulation resistance: > 500 MOhm at 500 V DC between supply and relay output conforming to 60255-5; > 500 MOhm at 500 V DC between measurement and relay output conforming to 60664-1; > 1 MOhm at 500 V DC between supply and measurement conforming to 60255-5; > 500 MOhm at 500 V DC between supply and relay output conforming to 60664-1; > 500 MOhm at 500 V DC between measurement and relay output conforming to 60255-5; > 1 MOhm at 500 V DC between supply and measurement conforming to 60664-1

[Ui] rated insulation voltage: 400 V conforming to IEC 60664-1

Supply frequency: 50/60 Hz +/- 10 %

Operating position: Any position

Connections - terminals: Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end; Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end; Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end; Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end

Tightening torque: 0.6…1 N.m conforming to IEC 60947-1

Housing material: Self-extinguishing plastic

Status LED: 1 LED green for power ON; 1 LED yellow for fault; 1 LED yellow for relay ON

Mounting support: 35 mm symmetrical DIN rail conforming to IEC 60715

Electrical durability: 100000 cycles

Mechanical durability: 30000000 cycles

Operating rate: <= 360 operations/hour full load

Compatibility code: RM3

Immunity to microbreaks: 500 ms

Electromagnetic compatibility: Emission standard for industrial environments conforming to IEC 61000-6-4; Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3; Immunity for industrial environments conforming to NF EN/IEC 61000-6-2

Standards: IEC 60255-6

product certifications: C-Tick; CSA; GOST; UL; GL

Ambient air temperature for storage: -40…70 °C

ambient air temperature for operation: -20…50 °C

Relative humidity: 95 % at 55 °C conforming to IEC 60068-2-30

Vibration resistance: 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1; 1 gn (f= 57.6…150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1

Shock resistance: 15 gn for 11 ms conforming to IEC 60255-21-1

IP degree of protection: IP20 (terminals) conforming to IEC 60529; IP30 (casing) conforming to IEC 60529

Pollution degree: 3 conforming to IEC 60664-1

Dielectric strength: 2 kV AC 50 Hz (shock wave 4 kV)

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 8.0 cm

Package 1 Width: 4.6 cm

Package 1 Length: 9.7 cm

Package 1 Weight: 123.0 g

Unit Type of Package 2: S03

Number of Units in Package 2: 48

Package 2 Height: 30.0 cm

Package 2 Width: 30.0 cm

Package 2 Length: 40.0 cm

Package 2 Weight: 6.526 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP1504008EN

Circularity Profile: ENVEOLI1504008EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins