Schneider-Electric
METSEEM4235B401
Tariff code: 9028309000
This product is discontinued.
Please contact us for possible replacement product options.
Link to the manufacturers site: METSEEM4235B401 - SysMtr,400A,FDS,Mb/BAC,3Ph4W IEC,S4
Main
Range: PowerLogic
Product name: PowerLogic EM4200
device short name: Enercept
product or component type: Energy meter
Type of cable: IEC cable
Device application: Power monitoring
Complementary
Metering type: Power factor; Active power P, P1, P2, P3; Voltage U21, U32, U13, V1, V2, V3; Average current Iavg; Active, reactive, apparent energy (signed, four quadrant); Apparent power S, S1, S2, S3; Peak demand power PM, QM, SM; Reactive power Q, Q1, Q2, Q3; Demand power P, Q, S; Frequency
Accuracy class: Class 1 conforming to ANSI C12.1; Class 1S conforming to IEC 62053-22
Measurement accuracy: 1 %
Measurement current: 0…400 A
Measurement voltage: 90 V AC 45...65 Hz minimum per phase; 480 V AC 45...65 Hz between phases; 300 V AC 45...65 Hz between phase and neutral
Frequency measurement range: 45…65 Hz
Network frequency: 50 Hz; 60 Hz
[In] rated current: 400 A
Display type: Without display
Local signalling: Status: LED (green and red); Line fault: 3 LED (green, orange and red); Dial pointer indication: LED (yellow); RX/TX: 2 LED (green, orange and red)
Analogue input type: Split core current transducer 0.333 V (impedance 33 kOhm); Voltage (impedance 2.5 MOhm)single phase; Voltage (impedance 5 MOhm)phase to phase
Number of inputs: 0
Number of outputs: 0
Communication port protocol: Modbus RTU at 9600 bauds...115200 bauds (automatic detection); BACnet MS/TP at 9600 bauds...115200 bauds (automatic detection)
communication of data: Net energy; Total energy
Function available: Fixed or rolling block
Provided equipment: Bracket for support; Hook; Split core current transducer 3
Connections - terminals: Input/output: plug-in connector (bottom) 0.2…1.5 mm² cable(s) ; Current transformer: plug-in connector (bottom) 0.2…1.5 mm² cable(s) ; Communication: plug-in connector (bottom) 0.2…1.5 mm² cable(s)
Wire stripping length: 6 mm
Mounting mode: By screws; By hook; Clip-on
Mounting support: Enclosure; DIN rail
Standards: EN 61010-1; UL 61010-1; CAN/CSA C22.2 No. 61010-1-12
Product certifications: CE conforming to EN 61010-1; CULus conforming to UL 61010-1; BTL; IEC
width: 46.63 mm
Depth: 35.81 mm
height: 152.36 mm
Environment
Measurement category: Category III 277 V; Category III 300 V
Electromagnetic compatibility: Conducted and radiated emissions conforming to FCC part 15 class A; Conducted and radiated emissions conforming to EN 61000-6-4; Conducted and radiated emissions conforming to EN 61326 + A1; Immunity to conducted disturbances conforming to EN 61000-6-2; Immunity to conducted disturbances conforming to EN 61326-1; Immunity to radiated fields conforming to EN 61000-6-2; Immunity to radiated fields conforming to EN 61326-1
IP degree of protection: IP20 conforming to IEC 60529
Relative humidity: 0…95 %
Pollution degree: 2
Ambient air temperature for operation: -30…70 °C
Ambient air temperature for storage: -40…85 °C
Operating altitude: < 3000 m
Packing Units
Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 97 cm
Package 1 Width: 211 cm
Package 1 Length: 241 cm
Package 1 Weight: 2336.36 g
Offer Sustainability
REACh Regulation: Free of Substances of Very High Concern above the threshold
REACh free of SVHC: Yes
EU RoHS Directive: Compliant
Mercury free: Yes
China RoHS Regulation: Product out of China RoHS scope. Substance declaration for your information
RoHS exemption information: Yes
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
© 2018 Alplan Kft.