Schneider-Electric
ATS22D47S6U

Range of product: Altistart 22

product or component type: Soft starter

Product destination: Asynchronous motors

Product specific application: Pumps and fans

Component name: ATS22

Network number of phases: 3 phases

[Us] rated supply voltage: 208...600 V - 15...10 %

Motor power hp: 15 hp 230 V; 30 hp 460 V; 40 hp 575 V

Factory setting current: 40 A

Power dissipation in W: 48 W for standard applications

Utilisation category: AC-53A

Type of start: Start with torque control (current limited to 3.5 In)

IcL starter rating: 47 A for connection in the motor supply line for standard applications

IP degree of protection: IP20

Assembly style: With heat sink

Function available: Internal bypass

Supply voltage limits: 177…660 V

Supply frequency: 50...60 Hz - 10...10 %

Network frequency: 45...66 Hz

Device connection: In the motor supply line

[Uc] control circuit voltage: 110 V - 15...10 % 50/60 Hz

Control circuit consumption: 20 W

Discrete output number: 2

Discrete output type: Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O; Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Minimum switching current: 100 mA at 12 V DC (relay outputs)

Maximum switching current: 5 A 250 V AC resistive 1 relay outputs; 5 A 30 V DC resistive 1 relay outputs; 2 A 250 V AC inductive 0.4 20 ms relay outputs; 2 A 30 V DC inductive 7 ms relay outputs

Discrete input number: 3

Discrete input type: (LI1, LI2, LI3) logic, 5 mA 20 kOhm

Discrete input voltage: 110 V <= 121 V

Discrete input logic: Positive logic LI1, LI2, LI3 at State 0: < 20 V and <= 15 mA at State 1: > 79 V, <= 2 mA

Output current: 0.4...1 Icl adjustable

PTC probe input: 750 Ohm

communication port protocol: Modbus

Connector type: 1 RJ45

Communication data link: Serial

Physical interface: RS485 multidrop

Transmission rate: 4800, 9600 or 19200 bps

Installed device: 31

Protection type: Phase failure: line; Thermal protection: motor; Thermal protection: starter

Marking: CE

Type of cooling: Forced convection

Operating position: Vertical +/- 10 degree

Height: 265 mm

Width: 130 mm

Depth: 169 mm

Net weight: 7 kg

Electromagnetic compatibility: Conducted and radiated emissions level A conforming to IEC 60947-4-2; Damped oscillating waves level 3 conforming to IEC 61000-4-12; Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5

Standards: IEC 60947-4-2

Product certifications: GOST; CSA; UL; C-Tick; CCC

Vibration resistance: 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6; 1.5 mm (f= 2…13 Hz) conforming to IEC 60068-2-6

Shock resistance: 15 gn for 11 ms conforming to IEC 60068-2-27

Noise level: 45 dB

Pollution degree: Level 2 conforming to IEC 60664-1

Relative humidity: 0…95 % without condensation or dripping water conforming to IEC 60068-2-3

Ambient air temperature for operation: -10…40 °C (without derating); 40…60 °C (with current derating 2.2 % per °C)

Ambient air temperature for storage: -25…70 °C

Operating altitude: <= 1000 m without derating; > 1000...< 2000 m with current derating of 2.2 % per additional 100 m

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 22.0 cm

Package 1 Width: 28.0 cm

Package 1 Length: 33.5 cm

Package 1 Weight: 5.706 kg

Unit Type of Package 2: P06

Number of Units in Package 2: 10

Package 2 Height: 73.5 cm

Package 2 Width: 80.0 cm

Package 2 Length: 60.0 cm

Package 2 Weight: 70.06 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins