Schneider-Electric
BMXDDM16022H

Range of produc: Modicon X80

Product or component type: Discrete I/O module

Product specific application: For severe environments

Discrete input number: 8

input type: Current sink (logic positive)

Discrete input voltage: 24 V DC, discrete input logic: positive

Discrete input current: 3.5 mA

Discrete output number: 8

Discrete output type: Solid state

Discrete output voltage: 24 V 19...30 V DC at 60 °C; 24 V 26.4 V DC at 70 °C

discrete output current: 0.5 A

Input compatibility: With 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2; With 2-wire/3-wire proximity sensors conforming to IEC 61131-2 type 3

Voltage range: 21.1...29.0 V 70 °C; 19...30 V 60 °C

Current state 1 guaranteed: >= 3 mA

Current state 0 guaranteed: <= 1.5 mA

Current per channel: 0.55 A at 70 °C; 0.625 A at 60 °C

Maximum current per module: 5 A 60 °C; 4.4 A 70 °C

Maximum leakage current: 0.5 mA at state 0

Maximum voltage drop: <1.2 V at state 1

Input impedance: 6800 Ohm

Insulation resistance: > 10 MOhm 500 V DC

Power dissipation in W: 3.7 W

DC typical filtering time: 4 ms

DC maximum filtering time: 7 ms

Response time on output: 1.2 ms

Paralleling of outputs: Yes : 2 maximum

Typical current consumption: 79 mA at 3.3 V DC; 59 mA at 24 V DC

Current consumption: <= 111 mA at 3.3 V DC; <= 67 mA at 24 V DC

MTBF reliability: 450000 H

Protection type: 1 external fuse per group of input channel0.5 A fast blow; overvoltage protection on output; reverse polarity protection on input; reverse polarity protection on output

Output overload protection: With electronic circuit breaker 1.5 In < Id < 2 In; With current limiter

Output overvoltage protection: With transil diode

Output short-circuit protection: With 2 A external fuse

Reverse polarity protection: Reverse mounted diode

Voltage detection threshold: < 14 V DC preactuator fault; < 14 V DC sensor fault; > 18 V DC preactuator OK; > 18 V DC sensor OK

Maximum tungsten load: 6 W

Switching frequency: 0.5/LI² Hz

Maximum overload time: 15 ms

Load impedance ohmic: >= 48 Ohm

Status LED: 1 LED (green) module operating (RUN); 1 LED per channel (green) channel diagnostic; 1 LED (red) module error (ERR); 1 LED (red) module I/O

Net weight: 0.115 kg

IP degree of protection: IP20

Directives: 2014/35/EU - low voltage directive; 2014/30/EU - electromagnetic compatibility

Environmental characteristic: Gas resistant class Gx; Gas resistant class 3C4; Dust resistant class 3S4; Sand resistant class 3S4; Salt resistant level 2; Mold growth resistant class 3B2; Fungal spore resistant class 3B2

Dielectric strength: 1500 V AC at 50/60 Hz 1 minute, output/ground; 1500 V AC at 50/60 Hz 1 minute, output/internal logic; 1500 V AC at 50/60 Hz 1 minute, primary/secondary; 500 V DC 1 minute, between group of inputs and outputs

Vibration resistance: 3 gn

Shock resistance: 30 gn

Ambient air temperature for storage: -40…85 °C

ambient air temperature for operation: -25…70 °C

Relative humidity: 5…95 % at 55 °C without condensation

Protective treatment: Conformal coating

Operating altitude: 0...2000 m; 2000...5000 m with derating factor

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 5.500 cm

Package 1 Width: 11.000 cm

Package 1 Length: 12.000 cm

Package 1 Weight: 151.000 g

Unit Type of Package 2: S02

Number of Units in Package 2: 15

Package 2 Height: 15.000 cm

Package 2 Width: 30.000 cm

Package 2 Length: 40.000 cm

Package 2 Weight: 2.542 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins