Schneider-Electric
ATS48C48Y

range of product: Altistart 48

product or component type: Soft starter

product destination: Asynchronous motors

product specific application: Heavy duty industry and pumps

device short name: ATS48

[Us] rated supply voltage: 208...690 V - 15...10 %

motor power kW: 110 kW at 230 V for severe applications; 132 kW at 230 V for standard applications; 220 kW at 400 V for severe applications; 220 kW at 440 V for severe applications; 250 kW at 400 V for standard applications; 250 kW at 440 V for standard applications; 250 kW at 500 V for severe applications; 250 kW at 525 V for severe applications; 315 kW at 500 V for standard applications; 315 kW at 525 V for standard applications; 355 kW at 660 V for severe applications; 400 kW at 660 V for standard applications; 400 kW at 690 V for severe applications; 500 kW at 690 V for standard applications

motor power hp: 125 hp at 208 V for severe applications; 150 hp at 208 V for standard applications; 150 hp at 230 V for severe applications; 300 hp at 460 V for severe applications; 350 hp at 460 V for standard applications; 350 hp at 575 V for severe applications; 400 hp at 575 V for standard applications

power dissipation in W: 1172 W for standard applications; 1386 W for standard applications

utilisation category: AC-53A

type of start: Start with torque control (current limited to 5 In)

IcL starter rating: 480 A for connection in the motor supply line for severe applications; 480 A for connection in the motor supply line for standard applications

assembly style: With heat sink

function available: External bypass (optional)

supply frequency: 50...60 Hz - 5...5 %

network frequency: 47.5...63 Hz

device connection: In the motor supply line

discrete output number: 2

discrete output type: (LO1) logic output 0 V common configurable; (LO2) logic output 0 V common configurable; (R1) relay outputs fault relay NO; (R2) relay outputs end of starting relay NO; (R3) relay outputs motor powered NO

output absolute accuracy precision: +/- 5 %

minimum switching current: 10 mA at 6 V DC for relay outputs

maximum switching current: Logic output 0.2 A at 30 V DC; Relay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5 20 ms; Relay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5 20 ms

discrete input number: 5

discrete input type: PTC, 750 Ohm at 25 °C; (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm

discrete input voltage: 24 V <= 30 V

discrete input logic: Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

supply inrush current: 0.4...1.3 Icl adjustable

analogue output type: Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm

communication port protocol: Modbus

connector type: 1 RJ45

communication data link: Serial

physical interface: RS485 multidrop

transmission rate: 4800, 9600 or 19200 bps

installed device: 31

protection type: Phase failure: line; Thermal protection: motor; Thermal protection: starter

marking: CE

operating position: Vertical +/- 10 degree

height: 670 mm

width: 400 mm

depth: 300 mm

net weight: 51.4 kg

power range: 110…220 kW at 380…440 V 3 phases; 110…220 kW at 200…240 V 3 phases; 250…500 kW at 380…440 V 3 phases; 250…500 kW at 480…500 V 3 phases

motor starter type: Soft starter

electromagnetic compatibility: Conducted and radiated emissions level A conforming to IEC 60947-4-2; Damped oscillating waves level 3 conforming to IEC 61000-4-12; Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5

standards: EN/IEC 60947-4-2

product certifications: UL; NOM 117; DNV; SEPRO; C-Tick; CSA; GOST; CCC; TCF

noise level: 55 dB

relative humidity: 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

ambient air temperature for operation: 40…60 °C (with current derating of 2 % per °C); -10…40 °C (without derating)

ambient air temperature for storage: -25…70 °C

operating altitude: <= 1000 m without derating; > 1000...2000 m with current derating of 2.2 % per additional 100 m

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP111033EN

Circularity Profile: ENVEOLI111009EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins