Schneider-Electric
ATS22D62Q
Tariff code: 8537109899
Link to the manufacturers site: ATS22D62Q - soft starter-ATS22-control 220V-power 230V(15kW)/400...440V(30kW)
Main
Range of product: Altistart 22
Product or component type: Soft starter
Product destination: Asynchronous motors
Product specific application: Pumps and fans
Component name: ATS22
Network number of phases: 3 phases
[Us] rated supply voltage: 230...440 V - 15...10 %
Motor power kW: 15 kW 230 V; 30 kW 400 V; 30 kW 440 V
Factory setting current: 57 A
Power dissipation in W: 59 W for standard applications
Utilisation category: AC-53A
Type of start: Start with torque control (current limited to 3.5 In)
IcL starter rating: 62 A for connection in the motor supply line for standard applications
IP degree of protection: IP20
Complementary
Assembly style: With heat sink
Function available: Internal bypass
Supply voltage limits: 195…484 V
Supply frequency: 50...60 Hz - 10...10 %
Network frequency: 45...66 Hz
Device connection: To the motor delta terminals; In the motor supply line
[Uc] control circuit voltage: 230 V - 15...10 % 50/60 Hz
Control circuit consumption: 20 W
Discrete output number: 2
Discrete output type: Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O; Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Minimum switching current: 100 mA at 12 V DC (relay outputs)
Maximum switching current: 5 A 250 V AC resistive 1 relay outputs; 5 A 30 V DC resistive 1 relay outputs; 2 A 250 V AC inductive 0.4 20 ms relay outputs; 2 A 30 V DC inductive 7 ms relay outputs
Discrete input number: 3
Discrete input type: (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
Discrete input voltage: 24 V <= 30 V
Discrete input logic: Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Output current: 0.4...1 Icl adjustable
PTC probe input: 750 Ohm
communication port protocol: Modbus
Connector type: 1 RJ45
Communication data link: Serial
Physical interface: RS485 multidrop
Transmission rate: 4800, 9600 or 19200 bps
Installed device: 31
Protection type: Phase failure: line; Thermal protection: motor; Thermal protection: starter
Marking: CE
Type of cooling: Forced convection
Operating position: Vertical +/- 10 degree
Height: 295 mm
Width: 145 mm
Depth: 207 mm
Net weight: 12 kg
Power range: 15…25 kW at 200…240 V 3 phases; 30…50 kW at 380…440 V 3 phases
Motor starter type: Soft starter
Environment
Electromagnetic compatibility: Conducted and radiated emissions level A conforming to IEC 60947-4-2; Damped oscillating waves level 3 conforming to IEC 61000-4-12; Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Voltage/current impulse level 3 conforming to IEC 61000-4-5
Standards: IEC 60947-4-2
Product certifications: C-Tick; CCC; UL; CSA; GOST
Vibration resistance: 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6; 1.5 mm (f= 2…13 Hz) conforming to IEC 60068-2-6
Shock resistance: 15 gn for 11 ms conforming to IEC 60068-2-27
Noise level: 45 dB
Pollution degree: Level 2 conforming to IEC 60664-1
Relative humidity: 0…95 % without condensation or dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation: -10…40 °C (without derating); 40…60 °C (with current derating 2.2 % per °C)
Ambient air temperature for storage: -25…70 °C
Operating altitude: <= 1000 m without derating; > 1000...< 2000 m with current derating of 2.2 % per additional 100 m
Packing Units
Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 31.0 cm
Package 1 Width: 23.5 cm
Package 1 Length: 36.0 cm
Package 1 Weight: 8.262 kg
Unit Type of Package 2: P06
Number of Units in Package 2: 6
Package 2 Height: 73.5 cm
Package 2 Width: 80.0 cm
Package 2 Length: 60.0 cm
Package 2 Weight: 64.0 kg
Offer Sustainability
REACh Regulation: Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free: Yes
China RoHS Regulation: X
RoHS exemption information: Yes
WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
© 2018 Alplan Kft.