Schneider-Electric
ABS2SC01EB

range of product: Interface for discrete signals

product or component type: Slim solid state output interface module

contacts type and composition: 1 NC

[Uc] control circuit voltage: 24 V

control circuit type: DC

maximum [In] rated current: 12 mA

reverse polarity protection: Control circuit: internal; Output circuit: internal

short-circuit protection: 3.15 A external fuse fast blow (Ik <= 1 kA AC and Ik <= 100 A DC)

[Ith] conventional free air thermal current: 2 A at 40 °C

local signalling: Green mechanical indicator for position of contacts and 1 green LED control signal state

sale per indivisible quantity: 5

width pitch dimension: 9.5 mm

control circuit voltage limits: 28.8 V

voltage state 1 guaranteed: 16.9 V

current state 1 guaranteed: 7.7 mA

voltage state 0 guaranteed: 5.6 V

current state 0 guaranteed: 2 mA

[Ue] rated operational voltage: 5...48 V

output circuit type: DC

rated operational voltage limits: <= 57.6 V

[Ie] rated operational current: 1.5 A DC-12 vertical position, single product conforming to IEC 60947-5-1; 1.5 A DC-13 vertical position, single product conforming to IEC 60947-5-1; 0.6 A DC-14 vertical position, single product conforming to IEC 60947-5-1; 0.6 A DC-14 vertical position, touching product conforming to IEC 60947-5-1; 0.9 A DC-12 vertical position, touching product conforming to IEC 60947-5-1; 0.9 A DC-13 vertical position, touching product conforming to IEC 60947-5-1

minimum switching current: 1 mA

maximum residual current: 1 mA

drop-out voltage: 1.5 V

response time: <= 0.05 ms from state 0 to state 1; <= 0.6 ms from state 1 to state 0

switching frequency: <= 1 Hz DC-14 module alone duty cycle: 40 %; <= 6 Hz DC-13 module alone duty cycle: 40 %; <= 700 Hz on resistive load duty cycle: 50 %

[Ui] rated insulation voltage: 250 V conforming to VDE 0110 group C; 300 V conforming to IEC 60947-1

flame retardance: V0 conforming to UL 94

cable cross section: 0.6…2.5 mm², 1 or 2 wires flexible without cable end screw clamp terminal; 0.27…4 mm², 1 wire rigid; 0.34…2.5 mm², 1 or 2 wires flexible with cable end

operating position: Any position

installation category: II conforming to IEC 60947-1

mounting support: Symmetrical DIN rail; Asymmetrical DIN rail; Combination rail

net weight: 0.34 kg

dielectric strength: 2500 V between wired interface and earth for 1 minute; 4000 V between I/O for 1 minute

standards: IEC 60947-5-1

product certifications: UL; LROS (Lloyds register of shipping); DNV; BV; CSA

IP degree of protection: IP20 conforming to IEC 60529

protective treatment: TC

fire resistance: 960 °C conforming to IEC 60695-2-1

shock resistance: 30 gn for 11 ms conforming to IEC 60068-2-27

vibration resistance: 5 gn conforming to IEC 60068-2-6 (f = 10…150 Hz)

electromagnetic compatibility: Electromagnetic field immunity test: level 3 10 V/m between 27...1000 MHz conforming to IEC 61000-4-3; Electrostatic discharge immunity test: level 3 8 kV conforming to IEC 61000-4-2; Fast transients immunity test: level 3 on input/output 1 kV conforming to IEC 61000-4-4; Fast transients immunity test: level 3 on power supply 2 kV conforming to IEC 61000-4-4; 1.2/50 µs shock waves immunity test conforming to IEC 60947-1

ambient air temperature for operation: -25…70 °C at Us; -5…55 °C unrestricted operation

ambient air temperature for storage: -40…80 °C

operating altitude: <= 3000 m

pollution degree: 2 conforming to IEC 60947-1

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins