Schneider-Electric
ABR2S112B

range of product: Interface for discrete signals

product or component type: Slim electromechanical output interface module

contacts type and composition: 1 NO

[Uc] control circuit voltage: 24 V

control circuit type: DC

width pitch dimension: 12 mm

maximum [In] rated current: 28 mA

reverse polarity protection: With

short-circuit protection: 6.3 A external fuse fast blow (Ik <= 1 kA AC and Ik <= 100 A DC)

[Ith] conventional free air thermal current: 5 A conforming to IEC 60947-1

local signalling: Green LED for control signal state

sale per indivisible quantity: 5

control circuit voltage limits: 28.8 V energization threshold: 16.9 V

connections - terminals: Screw clamp terminal

drop-out voltage: 3.8 V

holding current: 2 mA

power dissipation in W: 0.64 W

maximum switching voltage: 150 V DC; 250 V AC

[Ue] rated operational voltage: <= 120 V DC conforming to IEC 60947-5-1; <= 230 V AC conforming to IEC 60947-5-1

network frequency: 50/60 Hz

[Ie] rated operational current: 1 A AC-14 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1; 1 A AC-15 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1; 3 A AC-12 Ue: 230 V per 1000000 cycles conforming to IEC 60947-5-1; 1.5 A DC-13 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1; 1.7 A DC-12 Ue: 24 V per 1000000 cycles conforming to IEC 60947-5-1

minimum switching current: 5 mA

minimum switching voltage: 5 V

electrical reliability: <= 0.00000001

operating time: <= 10 ms between energisation of coil and closing of NO contact DC; <= 12 ms between de-energisation of coil and closing of NO contact DC

contact bounce time: <= 5 ms

operating rate in Hz: 10 Hz at no-load; 0.5 Hz at Ie

mechanical durability: 10000000 cycles

[Ui] rated insulation voltage: 250 V conforming to VDE 0110 group C; 300 V conforming to IEC 60947-1

flame retardance: V0 conforming to UL 94

cable cross section: 0.34…2.5 mm², 1 or 2 wires flexible with cable end; 0.6…2.5 mm², 1 or 2 wires flexible without cable end; 0.27…4 mm², 1 wire rigid

operating position: Any position

installation category: II conforming to IEC 60947-1

mounting support: Symmetrical DIN rail; Combination rail; Asymmetrical DIN rail

net weight: 0.041 kg

immunity to microbreaks: 1 ms

dielectric strength: 1000 V for 1 minute between open contacts; 2500 V for 1 minute between wired interface and earth; 4000 V for 1 minute between coil circuit and contact circuits

standards: IEC 60947-5-1

product certifications: CSA; LROS (Lloyds register of shipping); BV; DNV; UL

IP degree of protection: IP20 conforming to IEC 60529

protective treatment: TC

fire resistance: 960 °C conforming to IEC 60695-2-1

shock resistance: 30 gn for 11 ms conforming to IEC 60068-2-27

vibration resistance: 3 gn conforming to IEC 60068-2-6 (f = 10…150 Hz)

electromagnetic compatibility: Electromagnetic field immunity test: level 3 10 V/m between 27...1000 MHz conforming to IEC 61000-4-3; Electrostatic discharge immunity test: level 3 8 kV conforming to IEC 61000-4-2; Fast transients immunity test: level 3 on input/output 1 kV conforming to IEC 61000-4-4; Fast transients immunity test: level 3 on power supply 2 kV conforming to IEC 61000-4-4; 1.2/50 µs shock waves immunity test conforming to IEC 60947-1

ambient air temperature for operation: -25…55 °C at Us; -25…70 °C at Us with 8 mm space between ABR2S1...; -5…40 °C unrestricted operation; -5…55 °C from 0.85...1.1 Us

ambient air temperature for storage: -40…80 °C

operating altitude: <= 3000 m

pollution degree: 2 conforming to IEC 60947-1

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP1704005EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins