Schneider-Electric
XMPA12C2142

Range of produc: Telemecanique Pressure sensors XM

Pressure sensor type: Electromechanical pressure sensor

Pressure sensor name: XMP

Pressure rating: 12 bar

Fluid connection type: G 1/4 (female) conforming to ISO 228

Controlled fluid: Air (0…70 °C); Fresh water (0…70 °C); Sea water (0…70 °C)

Cable entry: 2 entries incorporating Pg 13.5 plastic cable gland, cable outer diameter: 9…13 mm conforming to NF C 68-300

Contacts type and composition: 3 NC snap action

Product specific application: -

Pressure switch type of operation: Regulation between 2 thresholds

Electrical connection: Screw-clamp terminals, clamping capacity: minimum : 2 x 4 mm²

Electrical circuit type: Power circuit

Scale type: Adjustable differential

Local display: Without

Sale per indivisible quantity: 1

Adjustable range of switching point on falling pressure: 0.3…10.3 bar

Adjustment range high setting: 1.3…12 bar

Possible differential minimum at low setting: 1 bar

Possible differential minimum at high setting: 1.7 bar

Possible differential maximum at high setting: 8.4 bar

Destruction pressure: 30 bar

Type of decompression valve: Without

control type: Without

Terminal block type: 6 terminals

Pressure actuator: Diaphragm

Materials in contact with fluid: Canvas covered nitrile; Chromated zinc alloy

Enclosure material: PA impregnated with fibreglass

Operating position: Any position

Maximum operating rate: 10 cyc/mn

Repeat accuracy: 3.5 %

[Ui] rated insulation voltage: 500 V conforming to EN/IEC 60947-1

[Uimp] rated impulse withstand voltage: 6 kV conforming to EN/IEC 60947-1

Maximum resistance across terminals: 25 MOhm conforming to IEC 60255-7 category 3; 25 MOhm conforming to NF C 93-050 method A

Electrical durability: 1000000 cycles 1.5 kW, operating rate <10 cyc/mn, load factor: 0.4, 400 V AC 3 phases; 500000 cycles 3 kW, operating rate <10 cyc/mn, load factor: 0.4, 400 V AC 3 phases; 600000 cycles 1.5 kW, operating rate <10 cyc/mn, load factor: 0.4, 230 V AC 3 phases; 700000 cycles 2.2 kW, operating rate <10 cyc/mn, load factor: 0.4, 400 V AC 3 phases

Mechanical durability: 1000000 cycles

Setting: Knurled knob and nut

Net weight: 0.43 kg

Terminals description ISO n°1: (1-2)NC; (3-4)NC; (5-6)NC

Depth: 98 mm

height: 106 mm

Width: 57 mm

product certifications: EAC

Standards: EN/IEC 60947-4-1; CE

ambient air temperature for operation: -25…70 °C

Ambient air temperature for storage: -40…70 °C

Vibration resistance: 3 gn conforming to IEC 60068-2-6 (f = 10…500 Hz)

Shock resistance: 50 gn conforming to IEC 60068-2-27

Electrical shock protection class: Class I conforming to IEC 60536

IP degree of protection: IP54 conforming to EN/IEC 60529

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 6.200 cm

Package 1 Width: 17.000 cm

Package 1 Length: 11.500 cm

Package 1 Weight: 530.000 g

Unit Type of Package 2: S03

Number of Units in Package 2: 20

Package 2 Height: 30.000 cm

Package 2 Width: 30.000 cm

Package 2 Length: 40.000 cm

Package 2 Weight: 11.002 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 160

Package 3 Height: 75.000 cm

Package 3 Width: 60.000 cm

Package 3 Length: 80.000 cm

Package 3 Weight: 99.004 kg

Sustainable offer status: Green Premium product

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

Environmental Disclosure: ENVPEP111130EN

Circularity Profile: N/A