Schneider-Electric
140DDM39000

range of product: Modicon Quantum automation platform

product or component type: Mixed discrete I/O module

discrete I/O number: 24

discrete input number: 16 2 groups of 8

discrete input logic: Sink

addressing requirement: 1 input word; 0.5 output word

network frequency limits: 47…63 Hz

discrete input voltage: 24 V DC

input voltage limits: 30 V; <= 1 V during one cycle; 56 V during 1.3 ms; <= 1 V during 10 s

voltage state 0 guaranteed: -3...5 V

voltage state 1 guaranteed: 15...30 V

current state 0 guaranteed: <= 0.5 mA

current state 1 guaranteed: >= 2 mA

input impedance: 2500 Ohm

discrete output number: 8 2 groups of 4

discrete output type: Solid state

discrete output logic: Sink

discrete output voltage: 24 V

output voltage limits: 19.2...30 V DC typical; 56 V DC during 1.3 ms

maximum load current: <= 0.5 A per point; <= 2 A per group; <= 4 A per module

maximum voltage drop: <0.4 V 0.5 A

absolute maximum output: 5 A during 500 µs per point

maximum load inductance: 500 mH at 4 Hz

maximum load capacitance: 50 µF

maximum leakage current: 0.4 mA 30 V DC

response time on output: <= 1 ms at state 0 to state 1; <= 1 ms at state 1 to state 0

protection type: On output by transient voltage suppression; On input by resistor limited; Internal output protection by 5 A fuse per group

associated fuse rating: 5 A per group

isolation between group: 500 Vrms for 1 minute

isolation between group and bus: 1780 Vrms for 1 minute

fault indication: Blown fuse on output; Loss of field power on output

power dissipation: 1.75 W + (0.36 x input point on) + (1.1 total output load current)

local signalling: 1 LED (green) for bus communication is present (Active); 1 LED (red) for no voltage in output and input (F); 2 LEDs (green) for output is turned on; 2 LEDs (red) for fault detected on the input point; 2 LEDs (red) for fault detected on the output point

marking: CE

bus current requirement: 330 mA

net weight: 0.3 kg

resistance to electrostatic discharge: 4 kV contact conforming to IEC 801-2; 8 kV on air conforming to IEC 801-2

resistance to electromagnetic fields: 10 V/m 80…1000 MHz conforming to IEC 801-3

ambient air temperature for operation: 0…60 °C

ambient air temperature for storage: -40…85 °C

relative humidity: 95 % without condensation

operating altitude: <= 5000 m

standards: CSA C22.2 No 142; UL 508; FM Class 1 Division 2

product certifications: cUL

Sustainable offer status: Green Premium product

REACh Regulation: Free of Substances of Very High Concern above the threshold

REACh free of SVHC: Yes

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

RoHS exemption information: Yes

China RoHS Regulation: X

Environmental Disclosure: ENVPEP071201EN

Circularity Profile: ENVEOLI0712001EN

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins