Skip to main content

Schneider-Electric
STBDDO3410K

24VDC KI 4PT KIT
Barcode: 3595863989298
Tariff code: 8538909999

This product is discontinued.

Please contact us for possible replacement product options.

Link to the manufacturers site: STBDDO3410K - 24VDC KI 4PT KIT

Main

Range of produc: Modicon STB distributed I/O solution

Product or component type: Standard digital output kit

Kit composition: STBXTS1100, 6-terminal screw type connector; STBXTS2100, 6-terminal spring clamp connector; STBXBA1000 base; STBDDO3410 module

Discrete output number: 4

Discrete output type: Solid state

Discrete output voltage: 24 V

Discrete output voltage type: DC

Complementary

Discrete output current: 500 mA

discrete output logic: Positive or negative

Output voltage: 19.2...30 V DC

Absolute maximum voltage: 56 V 1.3 ms

Response time: 560 µs off-to-on; 870 µs on-to-off

Cold swapping: Yes

Hot swapping fallback: Yes for standard NIMs

Fallback status: State 0 basic NIMs; User configurable standard NIMs

Protection type: Power protection integrated fuse on PDM time lag 10 A; Reverse polarity protection; Short-circuit protection; Thermal overload protection

Insulation between channels and logic bus: 1500 V for 1 minute

Maximum leakage current: 0.4 mA at state 0 30 V

Surge current: 5 A 0.5 ms

Maximum load capacitance: 50 µF

Maximum load inductance: 500 mH at 4 Hz

Minimum load: 0.5 mA

Reset: Manual reset COM fault

Product compatibility: Power distribution module STBPDT3100/3105; I/O base STBXBA1000

[Us] rated supply voltage: 24 V DC

supply: Power distribution module

Current consumption: 70 mA at 5 V DC for logic bus

Marking: CE

Overvoltage category: II

Status LED: 1 LED (green) module status (RDY); 1 LED per channel (green) channel status (OUT1 to OUT4); 1 LED (red) module error (ERR)

height: 13.9 mm

Depth: 70 mm

Width: 128.3 mm

Net weight: 0.11 kg

Environment

Standards: IEC 61131-2

product certifications: FM Class 1 Division 2; CSA; UL

Pollution degree: 2 conforming to IEC 60664-1

Operating altitude: <= 2000 m

IP degree of protection: IP20 conforming to IEC 61131-2 class 1

Ambient air temperature for operation: 0…60 °C (without derating)

Ambient air temperature for operation: 32...140 °F without derating

Ambient air temperature for storage: -40…85 °C without derating

Ambient air temperature for storage: -40...185 °F without derating

Relative humidity: 95 % at 60 °C without condensation

Vibration resistance: 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail; +/-0.35 mm at 10…58 Hz

Shock resistance: 30 gn for 11 ms conforming to IEC 88 reference 2-27

Packing Units

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 2.7 cm

Package 1 Width: 8.0 cm

Package 1 Length: 13.0 cm

Package 1 Weight: 133.0 g

Unit Type of Package 2: S02

Number of Units in Package 2: 28

Package 2 Height: 15.0 cm

Package 2 Width: 30.0 cm

Package 2 Length: 40.0 cm

Package 2 Weight: 4.15 kg

Unit Type of Package 3: PAL

Number of Units in Package 3: 448

Package 3 Height: 60.0 cm

Package 3 Width: 80.0 cm

Package 3 Length: 448.0 cm

Package 3 Weight: 59.584 kg

Offer Sustainability

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

© 2018 Alplan Kft.