Schneider-Electric
STBACI1225K

Range of produc: Modicon STB distributed I/O solution

Product or component type: Basic analog input kit

Kit composition: STBXTS1100, 6-terminal screw type connector; STBXBA1000 base; STBXTS2100, 6-terminal spring clamp connector; STBACI1225 module

Analogue input type: Current 4...20 mA

analogue input number: 2

analogue input resolution: 10 bits

Type of filter: Single low pass input filter 25 Hz

Absolute maximum input: 25 mA/50 V DC

Response time: 5 ms

Cold swapping: Yes

Hot swapping fallback: No for basic NIMs

Data format: EN 61131-2; IEC 61131-2

Update time: 10 ms

Integral linearity: +/- 0.2 %FS

Differential linearity: Monotonic

Input impedance: <= 300 Ohm

Maximum supply current for sensors: 100 mA per input channels

Absolute accuracy error: +/- 0.5 % of full scale 25 °C

Temperature drift: +/-0.01 %/°C

Insulation between channels and logic bus: 1500 V for 1 minute

Insulation between channels and sensor bus: 30 V

Addressing requirement: 2 input words

Product compatibility: Mounting base STBXBA1000; Power distribution module STBPDT3100/3105

[Us] rated supply voltage: 24 V DC

supply: Power distribution module

Current consumption: 30 mA at 5 V DC for logic bus

Marking: CE

Overvoltage category: II

Status LED: 1 LED (green) module status (RDY)

Depth: 70 mm

height: 13.9 mm

Width: 128.3 mm

product certifications: C-Tick; UL; CSA; FM Class 1 Division 2; ATEX Cat 3G

Pollution degree: 2 conforming to IEC 60664-1

Operating altitude: <= 2000 m

IP degree of protection: IP20 conforming to IEC 61131-2 class 1

ambient air temperature for operation: 0…60 °C

Ambient air temperature for operation: 32...140 °F without derating

Ambient air temperature for storage: -40…85 °C without derating

Ambient air temperature for storage: -40...185 °F without derating

Relative humidity: 95 % at 60 °C without condensation

Vibration resistance: +/-0.35 mm at 10…58 Hz; 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail

Shock resistance: 30 gn for 11 ms conforming to IEC 88 reference 2-27

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 2.79 cm

Package 1 Width: 8.13 cm

Package 1 Length: 13.21 cm

Package 1 Weight: 140 g

Unit Type of Package 2: S02

Number of Units in Package 2: 28

Package 2 Height: 15 cm

Package 2 Width: 30 cm

Package 2 Length: 40 cm

Package 2 Weight: 4.262 kg

Unit Type of Package 3: P06

Number of Units in Package 3: 448

Package 3 Height: 75.0 cm

Package 3 Width: 40.0 cm

Package 3 Length: 80.0 cm

Package 3 Weight: 85.928 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins