Schneider-Electric
STBACI0320K

Range of produc: Modicon STB distributed I/O solution

Product or component type: Standard analog input kit

Kit composition: STBXTS2100, 6-terminal spring clamp connector; STBXTS1100, 6-terminal screw type connector; STBXBA2000 base; STBACI0320 module

Analogue input type: Current 0...20 mA; Current 4...20 mA

analogue input number: 4

analogue input resolution: 15 bits + sign

Type of filter: Single low pass input filter 985 Hz

Absolute maximum input: 25 mA/50 V DC

Cold swapping: Yes

Hot swapping fallback: Yes for standard NIMs

Fallback status: State 0 basic NIMs; User configurable standard NIMs

Data format: IEC 61131-2; EN 61131-2

Update time: 10 ms

Integral linearity: +/- 0.05 %FS

Input impedance: 250 Ohm

Maximum supply current for sensors: 25 mA per input channels

Protection type: Short-circuit protection

Absolute accuracy error: +/- 0.4 % of full scale 25 °C

Temperature drift: +/-0.005 %/°C

Insulation between channels and logic bus: 1780 V for 1 minute

Insulation between channels and sensor bus: 200 V

Addressing requirement: 8 input words

Product compatibility: Mounting base STBXBA2000; Power distribution module STBPDT3100/3105

[Us] rated supply voltage: 24 V DC

supply: Power distribution module

Current consumption: 95 mA at 5 V DC for logic bus

Marking: CE

Overvoltage category: II

Status LED: 1 LED (green) module status (RDY); 1 LED (red) module error (ERR)

Depth: 70 mm

height: 18.4 mm

Width: 128.3 mm

product certifications: CSA; UL; FM Class 1 Division 2; ATEX Cat 3G; C-Tick

Pollution degree: 2 conforming to IEC 60664-1

Operating altitude: <= 2000 m

IP degree of protection: IP20 conforming to IEC 61131-2 class 1

ambient air temperature for operation: -25…70 °C

Ambient air temperature for operation: 32...140 °F without derating

Ambient air temperature for storage: -40…85 °C without derating

Ambient air temperature for storage: -40...185 °F without derating

Relative humidity: 95 % at 60 °C without condensation

Vibration resistance: +/-0.35 mm at 10…58 Hz; 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail; 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail

Shock resistance: 30 gn for 11 ms conforming to IEC 88 reference 2-27

Unit Type of Package 1: PCE

Number of Units in Package 1: 1

Package 1 Height: 2.7 cm

Package 1 Width: 13.0 cm

Package 1 Length: 8.0 cm

Package 1 Weight: 146.0 g

Unit Type of Package 2: S02

Number of Units in Package 2: 28

Package 2 Height: 15 cm

Package 2 Width: 30 cm

Package 2 Length: 40 cm

Package 2 Weight: 4.514 kg

REACh Regulation: Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free: Yes

China RoHS Regulation: X

RoHS exemption information: Yes

WEEE: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins