Schneider-Electric
SSL1D101JD
Tariff code: 8536419089
Link to the manufacturers site: SSL1D101JD - solid state relay,Plug-in,input 3-12 V DC, output 1-48 V DC, 0.1A
Main
Range of product: Harmony Solid State Relays
Device short name: SSL
Product or component type: Plug-in relay
Network number of phases: 1 phase
[Uc] control circuit voltage: 3...12 V
Output switching mode: DC switching
[Ui] rated insulation voltage: 48 V
Insulation resistance: > 100 MOhm at 500 V DC
Electromagnetic compatibility: Electrostatic discharge - test level: 4 kV criteria B (contact discharge) conforming to IEC 61000-4-2; Electrostatic discharge - test level: 8 kV criteria B (air discharge) conforming to IEC 61000-4-2; Conducted RF disturbances - test level: 10 V criteria A (0.15...80 MHz) conforming to IEC 61000-4-6; Radiated radio-frequency electromagnetic field immunity test - test level: 10 V/m criteria A (80 MHz to 1 GHz) conforming to IEC 61000-4-3; Radiated radio-frequency electromagnetic field immunity test - test level: 3 V/m criteria A (1.4…6 GHz) conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test - test level: 2 kV criteria B (5 kHz) conforming to IEC 61000-4-4; Electrical fast transient/burst immunity test - test level: 1 kV criteria B (5 kHz) conforming to IEC 61000-4-4; Surge immunity test - test level: 0.5 kV criteria B (line to line) conforming to IEC 61000-4-5; Surge immunity test - test level: 1 kV criteria B (line to earth) conforming to IEC 61000-4-5; Radiated emission - test level: 30...1000 Mhz conforming to IEC 60947-1; Conducted emission - test level: 0.15...30 Mhz conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage: 5.3 kV for input to case conforming to IEC 62314; 5.3 kV for input/output circuit conforming to UL 508; 5.3 kV for input/output circuit conforming to IEC 62314; 5.3 kV output to case conforming to -; 5.3 kV output to case conforming to IEC 62314; 5.3 kV for input to case conforming to UL 508; 5.3 kV output to case conforming to UL 508
Complementary
Mounting support: Socket
[In] rated current: 0.1 A
Output voltage: 1...48 V DC
[Uc] control circuit voltage: 3...12 V DC
Capacitance unbalance: 2.5 pF input/output
Minimum switching voltage: 3 V DC turn-on
Maximum switching voltage: 1 V DC turn-off
Input current: 4 mA
Input impedance: 1250 Ohm
Solid state output type: Transistor output; DC switching
Load current: 0.001…0.1 A
Absolute maximum voltage: 60 V
Maximum operating frequency: 500 Hz
Surge current: 0.3 A for 10 ms
Maximum voltage drop: <1 V on-state
Maximum leakage current: 0.001 mA off-state
Response time: 0.02 ms (turn-on); 0.13 ms (turn-off)
Overvoltage category: III
Width: 5 mm
Height: 28 mm
Depth: 15 mm
Net weight: 0.0041 kg
Device presentation: Complete product
Environment
Flame retardance: V0 conforming to UL 94
Dielectric strength: 3750 V for input/output
pollution degree: 2
Standards: IEC/EN 60947-1; IEC/EN 62314; UL 508; C22.2 No. 14
Product certifications: cURus; CSA; EAC; CE; UKCA
Marking: CE
IP degree of protection: IP00
Ambient air temperature for operation: -20…80 °C
Ambient air temperature for storage: -20…85 °C
Packing Units
Unit Type of Package 1: PCE
Number of Units in Package 1: 1
Package 1 Height: 0.700 cm
Package 1 Width: 2.500 cm
Package 1 Length: 37.000 cm
Package 1 Weight: 4.000 g
Unit Type of Package 2: BB1
Number of Units in Package 2: 12
Package 2 Height: 0.700 cm
Package 2 Width: 2.500 cm
Package 2 Length: 37.000 cm
Package 2 Weight: 62.000 g
Unit Type of Package 3: S01
Number of Units in Package 3: 1080
Package 3 Height: 15.000 cm
Package 3 Width: 15.000 cm
Package 3 Length: 40.000 cm
Package 3 Weight: 5.684 kg
Offer Sustainability
REACh Regulation: Reference contains Substances of Very High Concern above the threshold
EU RoHS Directive: Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Disclosure: ENVPEP1307068EN
Circularity Profile: NA
Take-back: No
Carbon footprint (kg.eq.CO2 per CR, Total Life cycle) : 1
© 2018 Alplan Kft.